Rally Pack 2000

You talking about my car? ....... Oh I get what mean now 😀

It would just remind me the rest of the car was red hot during Summer! (I think you can sympathize with that yourselves right now LOL)

If there is a Black Mk2 Escort carpet in there, count me in!

Its a 10 - 32 with a 10mm thread length and a Phillips Head.

I have issues with Orange Mk1s .......................................................................................... That look way better than mine!

Sent them an email thanks, will see what they say.

That one is slightly different part number its for 27 watt bulbs. Ive seen a couple of these Ive been tempted to try it and see what happens but they are pretty pricey to land here just for an experiment unfortunately.

It keeps indicating that the brake bulb lights have failed but they have all be renewed and checked. The Auto Electrician traced the fault to this module and I said I would try find one but cant it seems. I saw one listed for a different model as being refurbished so it has me wondering if that may even be a possibility?

Been trying to get a part for a late 80s SV21 Toyota Camry for the past month and need to it to bring the car home so getting a desperate so even thought I would reach out here. Im after what they call a Lamp Failure relay. Trouble is the seem to make the same car with different bulb wattage so they all seem to vary. I have seen the listed in the US but not the one i was after so as a last resort I wondered if you guys ever got those second generation Camrys there? It apparently is the same Module used in AE92 Corollas of the same vintage. I have even tried one of those strange Japanese Parts sites where I paid over a hundred quid for one waited for a week and then was told it was discontinued and have to wait a month to get my money back. Any ideas from your part of the world?

It doesnt look spit or anything so it may clean up ok. That may be the way to get one bumper and all. Where is it for sale?

The 257mm are the ideal with Princess callipers. I remember when I got mine Rally Design were the only place that had them. May have to wait it out unfortunately.

It does seem bright when you first get it done but a few heat cycles and it does dull quite a bit without actually discolouring or going blue in places like stainless.

While it may not be worth doing on older branch manifolds its definitely worth doing on original cast ones. The RS and Cortina ones are particularly prone to cracking with the main cause being temperature variations from inside and out. The ceramic coating contains more heat within and supposedly improves efficiency but it keeps the heat in so that the manifold cools down very slowly which sudden cooling is what causes them to crack. I have found mine still quite warm hours after switching the engine off. The added benefit is you don't have a rusty looking manifold. I chose silver to match the thermostat housing and other shiny alloy bits but just get it black if you want something more subdued.

A cuckoo in the nest! I would even possibly trade my angled one for a matching one. I know another Rally Pack owner who joined the forum looking for one like that.

He's probably still swearing at me though for driving the price up! LOL As Miniliteman will attest they were at 26 pounds with 60 seconds to go and finished at 180. I bet the seller got a huge shock checking one minute to the next LOL It would be funny if he just wanted one also we could have split it!

I didnt actually I put in a hundred and five with 30 seconds to go then reloaded to punch in 175 at ten seconds to go and he sniped me with 2 seconds to go.

Ceramic coating sort of replaces it now and looks much nicer.

God damn got sniped in the last 2 seconds, went to 175 pounds and got done at 180 pounds! Its now getting ridiculous, maybe I should sell the three I have just to get some money back for a change! Ive been years at this and still cant get one laying down some heavy cash. Im really getting p*ssed now! Stayed awake till 3am just to get these!

So you gave her the boot rather than putting her in one, that works too! The only way I could get some aircon fitted was in exchange for fixing a guys Twincam. You have to go with whatever way you can.

You didn't put the wife in the boot after you told her you were going to change an engine that runs perfectly fine for another by any chance? That would explain any funny wine moving from the front seat to the rear! We have told you this before keep it secret till after you've done it! Better for ask for forgiveness than permission!

Let us know if it fits ok? Every time i try using a component from another brand that should be identical it never works LOL

Ahhh the South African factor, its actually not that bad a bodge then if thats the case! LOL

Ooooooooo look at those joins on one and four. Are manifolds for Kents that expensive you have to resort to that instead? 🤔 New one in black looks pretty need though, very nice.

OMG its them!! No International shipping but I will send @colr6 a box of chocolates and batter my eyes he may be willing help out! I so want them!!! LOL

No unfortunately, she thought it was all just game 😀