BritRacer Posted July 6, 2020 Report Share Posted July 6, 2020 Does anyone know where I can buy the locking rings for the half shaft bearings. I got new SKF bearings from BRT but they cannot supply the lock rings. Any help would be much appreciated. Link to comment Share on other sites More sharing options...
DT36 Posted July 6, 2020 Report Share Posted July 6, 2020 If you take your shafts to a decent machine shop, they should be able to save and re-use your old ones when pressing the bearings. A standard 3 tonne Clarke press would not remove mine, so took mine in to be done. If you can't find any, I have a new one here that I can measure up with a Vernier for you, so you can get some knocked up on a lathe. Most people seem to sell them with the bearings. Link to comment Share on other sites More sharing options...
BritRacer Posted July 6, 2020 Author Report Share Posted July 6, 2020 Thanks dt36 I split the collars then used my S/P Bearing puller kit to pull the bearings off. Of course having split the collars I cannot now measure them. Regards Tony Link to comment Share on other sites More sharing options...
DT36 Posted July 6, 2020 Report Share Posted July 6, 2020 English RS2000 half shaft: Link to comment Share on other sites More sharing options...
Ray Posted July 6, 2020 Report Share Posted July 6, 2020 think I may have a pair in my scrap bin tbh, will look in the morning, if I don't answer then send me a mind jogger, ill pm you my moby no. 1 Link to comment Share on other sites More sharing options...
colr6 Posted July 6, 2020 Report Share Posted July 6, 2020 36 minutes ago, dt36 said: English RS2000 half shaft: Wish my digi calipers looked that clean 😎 1 Link to comment Share on other sites More sharing options...
BritRacer Posted July 6, 2020 Author Report Share Posted July 6, 2020 Thanks to both Ray and DT36 If you do have a pair I would be happy to buy them. Regards Tony Link to comment Share on other sites More sharing options...
Ray Posted July 6, 2020 Report Share Posted July 6, 2020 50 minutes ago, BritRacer said: Thanks to both Ray and DT36 If you do have a pair I would be happy to buy them. Regards Tony they should still be there, will check in the morning, just cover the post and theyre yours Link to comment Share on other sites More sharing options...
Ray Posted July 7, 2020 Report Share Posted July 7, 2020 all dug out of the bin, just PM me your postal address and I will get them posted to you Link to comment Share on other sites More sharing options...
BritRacer Posted July 7, 2020 Author Report Share Posted July 7, 2020 PM Sent Link to comment Share on other sites More sharing options...
Ray Posted July 7, 2020 Report Share Posted July 7, 2020 was a tad busy today, but posted first class an hour or so ago Tony, so on their way Link to comment Share on other sites More sharing options...
BritRacer Posted July 8, 2020 Author Report Share Posted July 8, 2020 Thanks Ray. Well in the absence of a press I am going to try and press the new bearings on, using my hydraulic bearing puller and actually draw the bearing into place. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now