psmk2 Posted September 3, 2020 Report Share Posted September 3, 2020 i was getting a bit of noise and vibration from the clutch kit i fitted a while back. The first time i did it the plate was round the wrong way as the springs hit the flywheel bolts. I turned it round and it was better but i then started getting a grinding noise...After taking the box out i found this. Any idea how this can be hitting the clutch The other thing i found was that the spigot bearing isn't fully seated in the crank and sits proud of it by a few mill. Is this supposed to be like that or should it be right the way in Link to comment Share on other sites More sharing options...
Mash Posted September 6, 2020 Report Share Posted September 6, 2020 Not sure why it's hitting, but my bearing is pushed right in, by a couple of mm from memory... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now