Jump to content

genuine bolts wanted


Recommended Posts

wanted, a set of original ford bolts (all 3 types) that hold the bell housing to the engine and the starter motor to the bell housing (inertia starter), for a crossflor engine with a type 2 box, they were/are very much specials, as todays bolts have a bigger head

these comprise of

4 longer bolts, M10x1.5 pitch, just over 2.1" total length, full thread, with curved flanged washered head (17.5mm dia) and socket size of 13mm, main bellhousing body, 2 per side and screw into the bell housing

3 shorter bolts, M10x1.5 pitch, 37.5mm total length, full thread, with a squared flanged washered head (17mm dia) and a socket size of 13mm, for the starter motor and screw into the bellhousing

2 shorter bolts, 3/8 UNC, i dont have a picture to show of these, but almost identical to the 4 long metric ones, but imperial, with an approximate 37mm total lenth, full thread, with curved flanged washered head (17.5mm dia) and socket size of 9/16", for the top to positions of the bellhousing and screw into the block

261237249_bolt1.thumb.jpeg.6ac1ead6d77434e536271964b014be11.jpeg

965452506_bolt2.thumb.jpeg.3ad1baca02e2dc5e4c4dd8b57dc27dbd.jpeg

 

 

 

Link to comment
Share on other sites

48 minutes ago, BaileyMex said:

If you get stuck, I've used this chap loads over the years, nice fella and holds a lot of stock

Not original Ford, but a good choice of sizes

https://www.escortrs.co.uk/

as you say nice bloke, but tbh, if your looking for originality, then he dont have much of anything any good, most of Billys stuff is typical repro, junk unfortunately 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...