MK2Ed Posted July 25, 2008 Report Posted July 25, 2008 Yesterday when under the car doin general inspection noticed that the bolts that mate the Gearbox to the Clutch Bellhousing were missing (bottom 2) and the top 2 were half undone..... As you prob know these are done up and only accessible from inside the bellhousing itself......... So question is will the shaft and bracket hold the gearbox in place nicely during drive to a mates place in Essex who has all the gear and 2 people can do the job (M25, etc)........? Dunno whether to take the risk - was also thinking that if the flywheel picks one of the bolts up even more damage could be done.........
tim Posted July 25, 2008 Report Posted July 25, 2008 sounds the same as wats happend here ed http://bbs.rallyesportescorts.co.uk/sho ... hp?t=29231
lee_capri Posted July 25, 2008 Report Posted July 25, 2008 vibration cause's bolt's to come undune,check your prop and dounut and the engine mount's just a thought it could also be the input shaft as have had this problum with a type 9 box,
MK2Ed Posted July 26, 2008 Author Report Posted July 26, 2008 Cheers guys... Tim, this must be a rare one, cause everyone i asked drew a blank...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now