fostersice Posted January 26, 2010 Report Posted January 26, 2010 hi guys hope you can help i have had the tank and swirl pot fitted with -6 fittings along with the 044 pumps and filters i have set up the tank and swirl pot and placed the pumps and filters to where i think i will have them what do you guys think before i final fit??????
you'll get 10s on that Posted January 26, 2010 Report Posted January 26, 2010 Fuel tank to low pressure pump to upper swirl pot feed. lower swirl pot pipe to low pressure pre-pump filter. From there to high pressure pump then high pressure filter. From there to fuel rail them to fuel regulator and back to uppermost pipe on swirl pot. finally upper pipe on swirl back to fuel tank.....simples
fostersice Posted January 26, 2010 Author Report Posted January 26, 2010 just as i would have done it lower outlet on tank to filter 1 filter 1 to 044 pump 1 044 pump 1 to upper inlet on swirl pot lower outlet to 044 pump 2 044 pump 2 to filter 2 filter 2 to fuel rail fuel rail to upper inlet on swirl pot top fitting on swirl pot to top fitting on tank just leaves the upper outlet on the tank blank it of ????
fostersice Posted January 27, 2010 Author Report Posted January 27, 2010 custom pump and filter mounts made really need to stop working on the car this late at night still if im going to have it running by feb and mot'd in april i need to get a push on,,,, may be begging for help soon
fostersice Posted January 27, 2010 Author Report Posted January 27, 2010 pumps and filters fitted now working on hoses
turnover Posted January 27, 2010 Report Posted January 27, 2010 dont you think the 044 is going to be too much as a lift pump,as they do flow at a high rate
fostersice Posted January 27, 2010 Author Report Posted January 27, 2010 It will keep the swirl pot full all the time and anything else will be returned back to the tank.
turnover Posted January 28, 2010 Report Posted January 28, 2010 ahh ok didnt realise you had extra inlet on the top of the tank
fostersice Posted January 28, 2010 Author Report Posted January 28, 2010 Can't wait to finish it and get it started for the first time
turnover Posted January 29, 2010 Report Posted January 29, 2010 yes will be worth all the hard work and money,but i will have a bet that you soon start uping the power once your on the road
fostersice Posted January 29, 2010 Author Report Posted January 29, 2010 fuel system finished -6 teflon braided with swage fittings 2 x 044 motorsport pumps 2 x motorsport filters 2lt swirl pot 12g alloy tank customer made pump mounts
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now