lee 1
Members-
Posts
160 -
Joined
-
Last visited
Content Type
Profiles
Forums
Store
Events
Everything posted by lee 1
-
A Question For Engine Builders / Machinists / Engineers!
lee 1 replied to Jimbob-Squarepants ©'s topic in OLD SKOOL FORD CHAT
Not sure on the standard crossflow bore size,but the piston to bore clearance is dependant on the pistons and should be specified by the piston manufacturer -
Never tried it myself but some bloke i was talking to at a rally recomended fitted them with no sliders on the origanol runners,but getting a clear film fitted on both sides by a window tinting firm.Like i said not tried it but sounds like it could be a good idea.
-
Black for sure But cleaned
-
WINDSCREEN SMASHED ON THE DUAL CARRIGEWAY
lee 1 replied to 72mk1escort's topic in OLD SKOOL FORD CHAT
Had the same thing happen a few years back in my old mk2 thought i was being shot at glad your ok,could have been nasty,get the laminated screen in then spend the next year finding bits of glassin the car it gets everywhere -
Expressed have them listed at £65 each http://www.steelpanels.co.uk/escort1ec.html Maybe the website is out of date but worth another phone call
-
That looks the boloxs mate
-
Still need at least a draw against croatia so we can still fook it up
-
link for wanted room... mk1 graddny seat belt anchor
lee 1 replied to FlashCadillac's topic in OLD SKOOL FORD CHAT
Here you go http://www.oldskoolford.co.uk/phpBB2/viewforum.php?f=27 -
No expert on mini's but assuming it is running points that would be my first port of call,allso if it's been stood for a year you will probably want to get some fresh fuel in it.Might be worth pulling the carb off and check it's not gummed up hope this helps
-
It is a ripoff,but most of them do that
-
well done What spec is it?
-
the diesel rod's are 3.2mm longer than pinto rods as stated in the how to power tune sohc pinto book.I have just checked a diesel rod against a standard pinto rod and it is definately longer not shorter.
-
Anyone local to me that is confident at helicoiling???
lee 1 replied to sambo's topic in OLD SKOOL FORD CHAT
As allready said mate 12mm hole would be to big for an m10 helicoil,but you could probably use a time sert kit.Same sort of thing except it uses a solid thread insert rather than the spring type thing helicoils use.Not sure where you would get one i know wurth are the uk importers hope this helps -
Depends what stone chip you used if it's a neutral colour like grey then you can go for it with paint,but if it's a dark colour it may effect your paint colour.
-
Thank fook for that,you can buy a evo anytime but you would struggle to ever get a mk1 like your's again. Now stop polishing it and get out there and rag it
-
best idea so far lol defo give them some
-
sorry did'nt realise about the coating sound's a good idea then as long as you get the coating done too.It will not matter how good you are at painting your not going to get paint were panels overlap.
-
Not sure if this is right but i was told by prepfab not to have a shell dipped if it's going to be a road car as it will remove every last trace of paint and seemsealer.Now this would leave a few area's that you are never going to be able to get paint on very vunerable to the old tin worm.As i say could be wrong but worth considering. They allso said they don't worry about that when building a rally shell as they only have a life expectancy of 3 years
-
sorry mate measured them and they are 60mm.Bit confused now as they defo came off a mk1 as i took them off myself,but they have not been ground down still 60mm on both ends.I can only assume my spring hangers were modified but can't check as i have chopped them off.
-
No probs i will check tommorow that they are 50mm.Oh and sorry but i have no idea what poundage they are
-
i have some single leaf springs at work that i took off a mk1 will check tomorrow wether they are proper ones or ground down.If they are any use to you and you can arrange to collect them(bit heavy to post)your welcome to them
-
could be wrong but i don't think cossie ones fit without modding the bellhousing
-
on the piss panels (mk1 escort) reproduction wings
lee 1 replied to Rick's topic in OLD SKOOL FORD CHAT
I have seen this done before twink with awesome results that is near enough what smith and deakin did for me with mine.as said ealier the first ones i got left a huge door gap whether down to my car or the wings i dont know,but they took them back and extended the rear edge free of charge -
on the piss panels (mk1 escort) reproduction wings
lee 1 replied to Rick's topic in OLD SKOOL FORD CHAT
There are pic's of my car on turbosport(cannot post pic's on here yet in case its spam apparently)with fiberglass wings fitted and to be honest they are not as good as steel wings but then i just could not justify the money steel wings fetch at the moment.Ihave managed to get them to fit better than in the pics but still not perfect and these are the second wings i have had,the first set left a door gap you could drive a bus through so sent them back and they were lengthened for me.Mine has not got bumpers fitted yet though so cannot comment about that. I must say though i have seen a car on turbosport and i am sure on here too that has fiberglass wings fitted that look perfect to me. At the end of the day not every one wants the same from their car me i like the fiberglass because it will never rust it's cheaper than steel,it's lighter and if i have a prang i unbolt the remains of the wing and bolt a new easly available one in its place. don't get me wrong i want my car to look good but it will get used so can live with a slightly iffy panel gap