Alan G

So its the tran x bearings I need then?? I'll be running standard halfshafts if it makes a difference??

Hi all, I'm looking for a part number for an english diff side bearings? I'm getting an lsd built up shortly - I've found a few on the web but theres a different bearing number for a tran x lsd listed? Thought they may have been the same?? http://www.motoscope.co.uk/escort_mk1_2 ... glish_Axle 48548-10: English Axle Side Bearing (Timken) 29749-10: Side Bearing Tran-X English LSD (Timken)

Thanks Jon, I'll try the t piece first and see how I get on!

Morning all, Looking for a bit of advice with my catch tank... I've seen quite a few with breathers on them - however mine does not! So basically when I connect it to the rocker cover breather cap and to the block - it will cause pressure in the system??? A mate of mine tries it and oil started spitting from the dipstick? Any ideas??

They could be decambered?

Yep I did my mates engine bay... turned out really well!

How did you wire them into your loom mate? Looking to do the same myself!

You need to get some sidemounts???

1 double plug with 2 black and purple wires and 1 brown wire going into it. connects to... 1 double socket with brown, black/purple, yellow/black wires going into it as far as I know!

It's time I drill my bulkhead to fit my brake fluid reservoirs: Is it as simple as drlling the holes like below (Rich Sav's mk1) - and then just bolting up from underneath? Or is there some sort of way of keeping them vertical?

Battery is in the boot... Cable is not an issue! So what I gether is just run it in line with the battery cable going directly to the starter! Sounds good to me!

Well, I got my hands on one of these yokes... And I want it mounted on my centre console! How would one wire it up.... I'm a dummy when it comes to electrics! Battery is in the boot if it matters?

http://www.oldskoolford.co.uk/phpBB2/vi ... t=princess

Hi guys, Going wiring up my electric facet fuel pump in the next few days... I've a few questions: I've got a toggle switch (on/off) & when the pump is in switched on I've got a green light that I want to light up! 1) Whats the best way & how to do it? 2) What relay / fuse should I use? 3) Could anybody whip up a wiring diagram for me as Ratters knows I'm a tit with electrics! Cheers lads,

Think I may have to change my wheels after seeing that pic and also, add some rs decals...

I've got mk1 capri one's going on mine - 50mm wide - seems to do the job! If all comes to all people just grind down the ends to male them fit!

Also, it doesn't have the fishnets as described in the description!

Thanks Jo... May be seeing ye lot there so!

€258 but which is closer? Holyhead or Pembrook?? And how long of a drive is it to the pod??

Whats the best & cheapest way to get there guys... ferries only because I want to bring back some stuff!

She's looking sweet Leon! Out of interest - how would one go about wiring mk1 works indicators into the original loom - have a pair here, just looking for a few pointers before I go tackling the job!