Jump to content

andypipe

Members
  • Posts

    387
  • Joined

  • Last visited

Everything posted by andypipe

  1. 1. Measure the overall width of wheel (OW) 2. Measure the 'T' dimension, which is the measurement from the back of the bolt up face to the outside of the inner rim 3. Divide the overall width by two which gives the centre line 4. Subtract the centre line figute from the 'T' dimension ET=T-OW 2
  2. Just found this. Might be of some help http://www.carlsalter.com/wheel_fitments.html
  3. There are not many cars with the same pcd as a ford, and those that are (pug, citroen, audi) are all front wheel drive so the offsets are totally different. Even cossie wheels are the wrong offset Best bet is to buy new http://cgi.ebay.co.uk/Compomotive-8x15- ... dZViewItem http://cgi.ebay.co.uk/Revolution-8x15-E ... dZViewItem http://cgi.ebay.co.uk/Revolution-8x15-E ... dZViewItem These are all Group 4 fitment but you can get them without I have just put 9x15 on mine and price was £140 each inc VAT
  4. I think 8" will be the most under the rear and 7" under the front, but dont quote me on that
  5. 7" require ET12 8" require ET0 9" require ET-24 Dont bother with Group 4 fitment otherwise you will have to change your studs or get conversion nuts
  6. No, also the other xflow of BDA powered cars couldnt
  7. Don't you mean the magic 100bhp a litre barrier ? no no, thats for pintos isnt it Did anyone manage more than 100 brake from a little crossflo then? Shouldn't you be fishing? You could go in your boat - you have the anchor It's a piece of pish getting 100bhp a litre from an anchor Just handover your £x to one of our illustrious engine builders and you'll be spanking x-flows all day long ... Ask HT how much they get from a 2000cc pinto
  8. Don't you mean the magic 100bhp a litre barrier ? no no, thats for pintos isnt it Did anyone manage more than 100 brake from a little crossflo then? You would be lucky to get it from a pinto too
  9. You will need an earth rod along with a 100ma RCD main switch
  10. There was some potent machinery there i can tell you
  11. Is yours an overhead supply?
  12. Let me know the results then
  13. Spoil sport
  14. Not even i know and i was there
  15. I will be there
  16. Twas a good day. Sorry i had to leave so early
  17. I will be there about 9ish
  18. Got to be this
  19. http://www.motorsportvision.co.uk/track ... uctID=4405 Who's going?
  20. Try this http://tv.retrofords.net/f0af142b6d3bea ... e-19-07-08
  21. Add another 10k and you can have mine
  22. In car here ftp://85.234.145.36/Movie%20Clips/Castl ... 8_0001.wmv
  23. To be honest for the price, you are better off buying the kit
  24. 2mm i thought 4mm was a minimum ?? It is and perspex shatters worst than glass
×
×
  • Create New...