Jump to content

Recommended Posts

Posted

Ive got quaife 2.39 or 2.48 first i think cant remember exactly and used to have a 4:4 salisbury with standard shafts and launching off the line at 6000rpm spinning a little then hocking up and going how i never broke a shaft i dnt know. your engine maybe different to mine tho i find mine dnt pull hard until way up the rev range :mrgreen::ykt:
My engines not peaky is got lots of mid-range grunt so hoping it can pull from lowish revs ok but won't know until i've tried it up there really . I might fit a 4:4 and try that one time but won't unless i really have to because my motorway cruising speed will drop down :(:thumbsup:
i done a 13.19 with 4:1 but it just try and error realy a. good luck :ykt::thumbsup: i also was doing about 130 mph down the mad mile racing wayne pow in his purple corsa once 4th gear flat out at 8000 rpm :shock::mrgreen:
Posted

i cant wait as well i think alot of people will be surpised :ykt:

i might run in your class for the 1st round gaz , so maybe we can line up together? i no i wnt stand a chance but would be cool :D

Nice one simon no probs :thumbsup: As your one of the few people whos been for a spin in mine do you reckon i can do a 13.5sec as it stands without changing anything then ? .

 

yep deffinatly mate you havnt got no worries :thumbsup:

Posted
Ive got quaife 2.39 or 2.48 first i think cant remember exactly and used to have a 4:4 salisbury with standard shafts and launching off the line at 6000rpm spinning a little then hocking up and going how i never broke a shaft i dnt know. your engine maybe different to mine tho i find mine dnt pull hard until way up the rev range :mrgreen::ykt:
My engines not peaky is got lots of mid-range grunt so hoping it can pull from lowish revs ok but won't know until i've tried it up there really . I might fit a 4:4 and try that one time but won't unless i really have to because my motorway cruising speed will drop down :(:thumbsup:
i done a 13.19 with 4:1 but it just try and error realy a. good luck :ykt::thumbsup: i also was doing about 130 mph down the mad mile racing wayne pow in his purple corsa once 4th gear flat out at 8000 rpm :shock::mrgreen:

 

i hate to say but that corsa is quik , did you beat him bill?

Posted
i done a 13.19 with 4:1 but it just try and error realy a. good luck :ykt::thumbsup: i also was doing about 130 mph down the mad mile racing wayne pow in his purple corsa once 4th gear flat out at 8000 rpm :shock::mrgreen:
Cool a 13.1 with a 4:1 diff is good news then Billy :ykt: . With a 130mph top speed to match then that is fast enough in an old escort i think :thumbsup:
Posted

yep deffinatly mate you havnt got no worries :thumbsup:

cheers simon , i value your opinion because you've been in most of the U.K.'s quickest N.A. 4 pots and know what they go like :ykt: . I won't go faster than a 2.0sec 60 foot so will be very happy if i can do a 13.5 sec pass in my "comfy" full weight street motor :thumbsup:
Posted
i done a 13.19 with 4:1 but it just try and error realy a. good luck :ykt::thumbsup: i also was doing about 130 mph down the mad mile racing wayne pow in his purple corsa once 4th gear flat out at 8000 rpm :shock::mrgreen:

 

Is that what you're running now?

Posted

I hate to say it to but that was a quick car he was on my rear quater all the way up there i know this is making excuses but i did have my mate pat with me who weighs about 18, 19 stone so i would say it was a draw. he told me he did a 13.0 at pod which is King quik for a corsa a :ykt::thumbsup:

Posted

Blimey Billy that's a quick corsa alright , what engines in it then ? Your 19 stone mate would have slowed you down lots , you should have booted him out and picked him up afterwards :mrgreen:

Posted
i done a 13.19 with 4:1 but it just try and error realy a. good luck :ykt::thumbsup: i also was doing about 130 mph down the mad mile racing wayne pow in his purple corsa once 4th gear flat out at 8000 rpm :shock::mrgreen:

 

Is that what you're running now?

No ive done a 12.6 since then now got 4:4 ratio just different diff and big fat shafts. is your escort the one that used to have a harris 2.2 pinto in always used to be at pod? Gaz i done 1.8, 1.9 0 to 60 foot on yokos and 1.7s on slicks not much different really either that or i just cant get them to hook up and go :oops::ykt::beer:
Posted
Blimey Billy that's a quick corsa alright , what engines in it then ? Your 19 stone mate would have slowed you down lots , you should have booted him out and picked him up afterwards :mrgreen:
it had a red top on throttle bodies with gas he was the man to beat at mad mile at the time :ykt::thumbsup:
Posted
No ive done a 12.6 since then now got 4:4 ratio just different diff and big fat shafts. is your escort the one that used to have a harris 2.2 pinto in always used to be at pod? Gaz i done 1.8, 1.9 0 to 60 foot on yokos and 1.7s on slicks not much different really either that or i just cant get them to hook up and go :oops::ykt::beer:

 

Certainly is. Mark, who had it before me, practically lived there. I've added a bit of weight and a N/A cossie engine so will be nice to see what it will do now. Thinking of going to the pod on the 16th March.

Posted
it had a red top on throttle bodies with gas he was the man to beat at mad mile at the time :ykt::thumbsup:
What's it go like without the spray though and did you beat it ? :nitrous:
Posted
Gaz i done 1.8, 1.9 0 to 60 foot on yokos and 1.7s on slicks not much different really either that or i just cant get them to hook up and go :oops::ykt::beer:
:party: 1.8sec 60 foot times on street legal 175mm wide skinney tyres is ace :ykt: . I'm sure i can do a quick time on those then so we'll see :thumbsup:
Posted

I've always liked that car mate looks the nuts i might come pod and watch you then i would have brung mine atmo cossie MK2 but i went pod 2 weeks ago and i rattle it. what BHP is yours mate? :thumbsup: I'd say it was a draw gaz side by side all the way :thumbsup:

Posted
:dope: Have you started on the Anglebox yet Wayne you lazy git ? Not enough atmo cossies on here so hurry up !!!!!! :mrgreen:
  • Admin
Posted
them tyres are the nuts didnt spin up at all on my 13.0 just bog down then went gaz you've got to get out of the gate to get good times :ykt::thumbsup:

 

YFKT Billy ..... don't matter what bhp, tyres, shafts, diff you got - if you can't get off the line you lose the time (ooh, that rhymes :mrgreen: ) .... seriously though., I know my car is not the quickest out there and I'm a girlie and all that but it's not the same as launching off the traffic lights on the high street and I don't think some people realise that if they've never done it before - and no, I'm not being patronising either. I think it would surprise a few people :ykt:

Posted
I've always liked that car mate looks the nuts i might come pod and watch you then i would have brung mine atmo cossie MK2 but i went pod 2 weeks ago and i rattle it. what BHP is yours mate? :thumbsup: I'd say it was a draw gaz side by side all the way :thumbsup:

 

Well as long as the weather's good I'll be there. Was 225bhp at Track n Road in Cossiematt's car.

 

I read about your engine, hope it's not too bad. Known about your car for years and would love to see it in the flesh.

Posted

Ever since i first heard Tango up Box Hill many moons ago i've wanted a 16v pinto engine (i was sitting outside a pub drinking beer when it came snorting and barking past the entrance 8) ) . Then when i heard spitbarnatts engine in Matt Downers mk2 on a video that was it , had to have one cos they sound the bollox :ykt::beer:

Posted
BOYS :roll::lol::lol::mrgreen:[daddys nearly home] :lol::lol:
all i see is alot of talk but no action :mrgreen: :mrgreen: :mrgreen::thumbsup:

you"ve got a lot to learn billy boy i"ve been there done that and got the silverware to prove. :mrgreen::mrgreen::thumbsup:

Posted

you"ve got a lot to learn billy boy i"ve been there done that and got the silverware to prove. :mrgreen::mrgreen::thumbsup:

Yes Wayne won "best moustache" in 1989 :mrgreen:
Posted

you"ve got a lot to learn billy boy i"ve been there done that and got the silverware to prove. :mrgreen::mrgreen::thumbsup:

Yes Wayne won "best moustache" in 1989 :mrgreen:

and side burns :lol:

Posted
Ever since i first heard Tango up Box Hill many moons ago i've wanted a 16v pinto engine (i was sitting outside a pub drinking beer when it came snorting and barking past the entrance 8) ) . Then when i heard spitbarnatts engine in Matt Downers mk2 on a video that was it , had to have one cos they sound the bollox :ykt::beer:

 

Amazing what has an insane effect in the membrane... :ykt:

 

I had to have a MKII RS2K after one screamed past me (while in my old Triumph Toledo) back in the late 80's... 8)

 

And had to have a 2.2 pinto after being punched in the stomach by the low down torque when in one and seeing the Harris' ones at the Pod... 8)

 

And now I want a 2.4 pinto... coz they're 'ard :lol:

Posted

Yes mate it's the noise that i love the most . Twin DCOE carbs sound good on anything but the atmo cossies have a certain extra something in the noise department that's for sure :ykt: . I feel sorry for the whooooooosh psssssssst turbo posse cos they sound pants at best !!!!!! :wink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...