i know i shouldnt think about it

[sporty-corty16v]

but the cortinas budget has been reduced lately, and with front wings going for 450 plus on the bay, do i remove my good/average wings replace with fiber glass and up the budget for the tina ...???

 

 

now dont all mob me at once lol

[LEONMEX]

got glass wings on my escort & people don't realise unless i tell them. Your car do as you please with it.

[frenchy]

your car mate if cah is tight then do it

[Mr Sam]

go for it, they will never rust again

[stephens_xpack]

Is there an issue with weight when replacing steel wings with fibre glass?

Probably not so much with a front engined motor, but was thinking of going fibre glass fronts on my 911 SC....anyone have any thoughts on it? As the engine is in the back and the steel wings are fairly hefty.

.

Anyone who might know...cheers, I know it's not a ford but it is still oldskool and very

[sebspeed]

WHY DONT YOU REPAIR THE ONES ON THE CAR-I DID MINE 15 YEARS AGO AND THEY STILL LOOK OK.

[sporty-corty16v]

WHY DONT YOU REPAIR THE ONES ON THE CAR-I DID MINE 15 YEARS AGO AND THEY STILL LOOK OK.

 

my wings are good, only the lower rear section of drivers wing needs a repair, but was looking at raising funds as im not after concourse/originality just clean and straight

[john_3.0s]

WHY DONT YOU REPAIR THE ONES ON THE CAR-I DID MINE 15 YEARS AGO AND THEY STILL LOOK OK.

 

my wings are good, only the lower rear section of drivers wing needs a repair, but was looking at raising funds as im not after concourse/originality just clean and straight

 

if they are repairable then you could always sell them and put the money towards the fibreglass ones

[sporty-corty16v]

WHY DONT YOU REPAIR THE ONES ON THE CAR-I DID MINE 15 YEARS AGO AND THEY STILL LOOK OK.

 

my wings are good, only the lower rear section of drivers wing needs a repair, but was looking at raising funds as im not after concourse/originality just clean and straight

 

if they are repairable then you could always sell them and put the money towards the fibreglass ones

 

that was my whole point

 

 

now wheres that grinder lol