fostersice Posted March 26, 2010 Report Posted March 26, 2010 plans for to day get the car running for the first time day started with wiring the rear lights DONE wire up the twin fuel pumps DONE rewire the engine ALMOST DONE run new power lead though out the whole car DONE wire up headlights and sports with new bolds DONE make sure all water hoses are done and tight DONE now the run parts oil the engine DONE oil gearbox DONE oil diff DONE water in the rad DONE engine oil done and no leak SPOT ON gearbox oil done and no leaks just a little oil from over filling diff oil done happy days then drip drip drip head in hands i have a leak from the diff prop end just have to find out how to change the oil seal and if its just that i have to change or is there more to it ??? added water to the rad and drip drip drip dry everything off and still drip drip drip looks like its coming from water pump but i strip the whole engine and replaced every gasket for new uprated ones and even uses gasket sealant on the water pump??????? so i didnt get time to finish off the wiring today ;-(
Beakster Posted March 26, 2010 Report Posted March 26, 2010 Is it a new water pump? Could be the pump itself leaking. They are cheap and easy to get at motorfactors for a pinto. I did the diff front oil seal a while ago. Couldn't pull it out, so cut it out with a dremel. Put some sealer around the new one when putting it in. You got to be careful about the torque on the bolt for the part that needs removing to get at it. Check haynes manual. I got the replacement front diff seal from Ford, they still had them in. Was about 8 quid I think.
DEP Posted March 26, 2010 Report Posted March 26, 2010 Never mind m8, these things are sent to try us
fostersice Posted March 27, 2010 Author Report Posted March 27, 2010 it is trying me lol going to ask work today if i can change the rear axle seal with out having to strip the whole diff down still i may still change it to a lsd yet lol been told it is normal for the water to leak out of the water pump whens been sitting for a long time when i got the engine it was new and had only been bench tested at ticford ford,there was still oil and water still in the engine with no leaks i wanted to paint the block so striped the whole engine down and replace all seals and it has sat for 8months with no water in it. was told once it has been started and run for a while it will be fine fingers crossed
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now