Mk2 fiesta zetec

[Liam381]

Hi I've put a 1.8 zetec from a escort in my mk2 and need an engine mount some people say a cvh engine mount fonts with a bit of modification is there any other mount or has anyone out there got a cvh mount many thanks Liam

[Fiesta Steve]

You may get a better response from a forum dedicated to the mk2 fiesta. I'm sure you will find people with far more knowledge elsewhere on the web. Unfortunately OLD SKOOL FORD doesn't cater for the wonderful ford that is the Mk2 Fiesta.

Ps: the CVH mount bolts straight onto the Zetec block

[Liam381]

Thanks Steve do you no if the cvh boult in the same place as the stranded mount

[Fiesta Steve]

I don't know fella, you really need to try somewhere like xrtwo.com where many will have done this conversion already..

[Escort Mk1 4 Door]

there in the same place as i have a mater 1800zetec on bike carbs with cvh mount was 1100 pop plus bolted in no probs

[deadly456]

As far as i can remember the cvh mount goes on the back of the zetec block fine but i believe when you put engine in,the cambelt end sits to low so you have to do some chopping