Garage Clear Out - Escort and Xflow Parts

[tomk1]

Had a sort out yesterday. Need to clear the garage so everything must go. Most are standard escort/xflow parts. I'm sure someone needs them.
Open to offers.
Pictures to follow.
 

Twin Choke 32 Weber carb and Manifold £60.00     TCA (pair) with HD rubber bushes £50.00 Headlining (mk1 black) £60.00 Headlight Lucas £10.00 Headlight £10.00 Superflex Leaf spring 0294KSS £38.00 Multi Leaf Springs £40.00 Exhaust 4 branch manifold £30.00 Steel wheel and tyres x5 £40.00 Seat belt buckle x2 £10.00 Headlight surround £10.00 Std. carb and manifold x2 £20.00 Standard exhaust system £20.00 Steering wheel £20.00 Engine mounts £20.00 Air filter standard £10.00 Strut spring tops £5.00 Brake calipers M16 £20.00 1100 conrods £40.00 1300 conrods £40.00 1100 crankshaft £40.00 1300 crankshaft £40.00 Distributor x2 £20.00 Handbrake gaiter £10.00 Standard throttle cable £5.00 Camshafts x3 £10.00 Anti roll bar £20.00 Stainless exhaust manifold (repair needed) £30.00 Radiator £10.00 Coil x2 £5.00 Brake pads M16 (<50 miles use) £20.00 clutch pressure plate 1100 £10.00 clutch pressure plate 1300 £10.00

 

[BTM_FDR]

Hi mate, what condition is the radiator in?? Rhanks

[tomk1]

It's the plastic top standard radiator. I used it for a few years with no issues.

I'll get a picture up...thousand words 

[BTM_FDR]

That's cool mate, I'm after a standard rad for xflow just to get me started

[BTM_FDR]

Any luck with rad??

[tomk1]

There's play in one of the mounts on the side. Could be fixed with a couple of tacks. Other than that it's in working order.

[stevegav]

Hi, is the manifold a 421 ? crossflow ? 

[tomk1]

I've got 2 exhaust manifolds for sale:

4-2-1 mild steel manifold

4-1 stainless manifold which needs a repair (2 of the welds have cracked)

£30 each

[Mexico Mark 2]

Hi have you still got the carb and manifold? Also how bad are the cracks in the welds on the stainless manifold?

[tomk1]

Pictures of the 2 exhausts and the carb and manifold below

Carb is a Weber 32 DGR twin choke

 

[oxb1l]

Can you give me a price including post to Fk41pn for the 4-1 manifold plz

 

Thanks

 

Bill