2.1CORTINA

I've just listed on the bay a set of the chrome rim embellishers for them.

I have a set of four Capri laser wheels, so similar to RS, BUT these are a little different. They have had a bit of money spent on them (by a previous owner). They have been lightened, the central part has been milled flat. This makes them look so good. They are painted black, I was told powder coated but I don't know the first thing about paint so can't confirm that. They had a set of tyres fitted once but the wheels haven't ever been fitted to a car since the work was done. They've been tucked safely away in my ownership for about four years. Id need to dust them off to confirm but their condition is very good.

lifting eyes, clutch fork, fuel pump, viscous fan all on eBay starting at 99p. ending tomorrow (Tuesday) afternoon.

holy crap, I didn't know you could take that much off a standard flywheel. great to see its been put to good use!

See pics. All in good condition. Owner handbook is 1981 3rd edition. Dealer guide is 1982. (double sided) £10 total for all four Inc postage.

Are you still looking for wheels?

the one I removed from my mk5 cortina (pinto) looks like that. I don't know if they are the same but if you send me your number I can send you a picture from my phone if you like. nathan

FLYWHEEL SOLD

The flywheel is not a clean and shiny example, the surface will need work before fitting it. But I gather that's your plan anyway.

I live in Stithians not far from falmouth. I'm only having to pop into work for a meeting Monday morning so I could drop it to you Monday after 9am? Or I can PM you my address if you want to arrange something else? If the chap still wants it that is?

Are you offering to pass on the flywheel?

No they don't. Sorry.

Hi unfortunately I'm not around then, I have posted one in the past via my hermes and it was fairly cheap. I don't know anybody that's going to the show either...is that the duchy show?

I'll have to check, was that an option as the one in my cortina didn't have it.

Located in Cornwall

I've sold my cortina so don't need any of these spares anymore. M16 calipers need refurbishing, original hard pipes included, also with what looks like an unused pad fitting kit, £20 the pair. No idea if the alternators are good or not. £5 for all three. Pinto flywheel £5. Lifting eyes £5 for a set. Pair of mk5 cortina stalks £5. Mk5 Tina 4 speed gear lever and knob £5. Mk5 Tina window winders full set £5 . Mk 5 Tina bonnet hinges £5. 3 x old fuel pumps condition unknown £5. 1 x new fuel pump £5. Mk5 Tina 4 speed gbox crossmenber £5. Viscous fan £5. Floflex bushes, don't know where for though, can find out dimensions if your interested £5. Type 9 bell housing to engine sandwich plate, has been cut but will still function as is, or you could weld it £5. Ford oil pump, unknown if it's a goodun £5. Clutch fork, believe it was from the 4 speed but I think the type 9 ones are the same £5. Cam cover breather caps, one yellow and one home made alloy, the pair £5.

I have one for sale here, I can measure it up for you if your interested. http://www.oldskoolford.co.uk/ipb/index.php?/topic/82919-prices-reduced-tuned-pinto-head-21-short-engine-twin-carb-inlet-etc/

BUMP

Its about 313mm from one end of the tube to the other, not taking in to account the bends in the tube. From the top of the tube to the bottom of the dip stick its about 460mm. I guess if you know the dimensions your after you could easily mod this one to the correct length? PM me for the parts you want and I will send you payment details. Cheers

DISTRIBUTER SOLD CAM COVER SOLD FLYWHEEL SOLD DIPSTICK SOLD ALTERNATOR SOLD HEAD SOLD THERMOSTAT HOUSING SOLD ENGINE SOLD SUMP SOLD Hi, I have various bits for sale, all will be dirty and used (just under 10,000miles) but perfectly functional as they were being used in my car until recently. Some parts may have a bit of surface rust or remnants of gaskets etc. I would reccommend that parts are thoroughly cleaned before fitting. All parts can be posted except I would rather have the short engine collected. Standard width head modified by "SRD" in Launceston Cornwall, gas flowed, skimmed, bronze valve guides, hardened valve seats, Kent cam kit FR30. Cost to me was over £800 so grab a bargain at £300 ONO £20 postage Drive torque stage one clutch in good condition. Cost new £133 but I can't imagine there's a lot of demand for second hand clutches so £20 ONO £8 postage. JEM built 2.1 short engine, see jem website for full spec on their engines, comes with head bolts that are shorter as the block is decked. Will also come with an "xpower engines" high pressure oil pump. Will need old gasket etc cleaning off. £300 ONO collection only. Sump, few dents and a bit of surface rust, dirty but functional. £10 + £8 postage. Fan, viscous type. £10 + £8 postage. Lifting brackets/eyes. Good cond. £5 + £5 postage. Water pump for viscous fan and thermostat housing. £5 the pair +£5 postage. Gearbox to engine sandwich plate. Has been cut as can be seen in the PIC but doesn't effect it in any way. £10 + £5 postage. Inlet manifold for twin carbs, I ran 40's on here but the openings look plenty big enough for 45's. Make is hiflo and has been repaired with welds, all looks very professional and didn't deter me buying it. £35ONO + £10 postage.

Hi, yeah I've still got it. I don't have a timing plate, but when i set it up initially I set my vernier pulley to 0 degrees as this cam is safe to do so and ran ok like this until it was set up on a RR. I believe the only things that will be missing from the kit will be, valve springs, cam lube, valve stem seals and the box. When I remove the followers and ball studs i will mark them up valves 1 to 8 so they can be re-fitted in the same order.

sold

This is going on eBay tonight, starting from £200

That's fine. No worries.

Im not sure what the cost of bubble wrap is but I'm happy to post it for £25. I think it will be around that. If you want it let me know so I can get some bubble wrap.