BaileyMex Posted May 17, 2007 Report Posted May 17, 2007 Hi all My new H & H Ignition, High Torque Starter turned up today, and they told me that it does away with the starter solenoid...COOL... But Cant figure out once the solenoid is removed where to run the live and earth too that were on it, I've emailed H&H but I know a couple of you have fitted one Any suggestions??
johnny_h Posted May 17, 2007 Report Posted May 17, 2007 I want one even more now! I didn't know it did away with the starter solenoid! Col, gove H&H ignition systems a bell mate, they do loads of stuff like this and are very helpful. They should be able to shed some light
BaileyMex Posted May 17, 2007 Author Report Posted May 17, 2007 There are two thicker than normal wires comin out of the loom, one red one black, the red goes onto one of the Big nut n bolt terminals, the black goes onto one of the spade terminals, and there is the ignition live going onto the other spade terminal the Thick live goes up under the large red battery cable the Thick Earth is attached to a spade terminal on the underside
Posse Posted May 17, 2007 Report Posted May 17, 2007 yeah scrap the solenoid and get one of them coli packs form h @ h
Guest M.Bird DOHC Posted May 17, 2007 Report Posted May 17, 2007 Looks like you gotta undo that nut and theres a wire under there (the black one), disconnect it, that looks like your solinoid activation wire so put you big fat main battery cable wire to the bolt terminal along with the other small wire on the same terminal and put your ignition wire to the wire you took off that stud on the starter! Im only guessing m8 but that seems logical to me! Or just leave it and put your starter wire to it, the wires on that stud so it will activate and you can keep your original solinoid! And you gonna have fun fitting it as its bigger than your standard one! With that solinoid on top of it!
Guest M.Bird DOHC Posted May 17, 2007 Report Posted May 17, 2007 yeah scrap the solenoid and get one of them coli packs form h @ h Darren i dont think a coil pack will help avtivate the starter m8!
MightySprocket Posted May 18, 2007 Report Posted May 18, 2007 I fit one and left the solonoid on for now, just connected it the same as the original starter... Phil at H&H said that was fine
BaileyMex Posted May 18, 2007 Author Report Posted May 18, 2007 Cheers for the reply lads, I'd like to ditch the solenoid if I can, as it will clean up the bay and one less thing to go wrong But I'm off down the pub now so depending on how bad the hangover is depends on if I attempt it in the morning Marty, your Idea makes sense, thats what I thought but I was just guessing too
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now