another gearbox ID please?

[Mr Sam]

so what is she, previous owner says 1600E 2 that have seen the car have said 2000E

 

looks like the shifter hole has been moved back so its longer than the original box

 

can only find 4 gears i.e. 3 and 1 reverse?

 

109e on the engine block

 

close up of the slave cylinder, looks like the engine plates been cut to fit it

 

 

 

i must say a hydrolic clutch will be a luxhary to the cable on the fezza

[Jimbob-Squarepants ©]

Nice one Sam... 1200 Super engine

 

Not sure about the box though mate

[old skool freestyler]

the gearbox is of my stepdads mk2 cortina 1600e bellhousing is of 997cc engine to match it up to precross flow

[Mr Sam]

where are the gears then and how many?

[old skool freestyler]

4 speed reverse is push gear lever down then towords pasenger seat then up

 

hope that helps

[Mr Sam]

same as fezzy box then tryed that and couldnt find reverse, not having a clutch doestnt help

 

 

so is there any difference between the 1600 and 2000e boxes?

[old skool freestyler]

the gear stick on the 1600 one is a nylon cup thing to hold it in and has two prong on the end of the gearstick in the box the 2000e one has a huge metal nut holding it in and a round ball on the end of the gear stick gear box side

as far as i know i also think the gearstick comes out closer to the bell housing on the 2000e box

[old skool freestyler]

some one tell me if im wrong as open to a bit of construtive critisam

[bortaf]

have a look https://www.burtonpower.com/Default.aspx

under tech support, i'd say you where pretty mutch spot on with the gearstick