SmokeEm Posted August 30, 2007 Report Posted August 30, 2007 Last weekend I changed both bottom TCA arms, both track rod ends & the front ARB bushes on my 2 litre Capri to try & sort out the vague steering/handling. Now that it's all done, I want to move to the rear.. Oooh err! - Can I change over to single leafs without any modification as I want to then see if I can fit an Xframe kit (Despite it being so low) I would obviously change the bushes in the new single leafs..
escort21 Posted August 30, 2007 Report Posted August 30, 2007 Sinlge 2.8 leafs and a set of polybushes, sprinkle with an xframe and it'll tighten up the handling loads ...beware of th removing the old leafs...the front bolts in the springs are sometimes needed to be ground off as the bolt rusts to the centre of the collar..all sorts of problems then
SmokeEm Posted August 30, 2007 Author Report Posted August 30, 2007 Thanks mate - I might only use std new bushes - not sure yet, but where can I get new bolts from as I'd rather have them ready (both front & rear ones)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now