lee_capri Posted February 6, 2008 Report Posted February 6, 2008 going to respray the cappa,but it's well shiney,did rub down a bit and the primer just run's and go's spoty,what's the best way to get the suface,is the secreat only to dull the paint
Guest MK1gaz Posted February 6, 2008 Report Posted February 6, 2008 You need to degrease the panel first or the primer/paint will react . Just wipe it over with some thinners first
Jimbob-Squarepants © Posted February 6, 2008 Report Posted February 6, 2008 Yep as Gaz said, but don't forget to scotch off the shiny paint. Go to a paint shop and ask for a pack of Red Scotchbrites and then rub the panel with one of these to dull the paint, then clean the panel with panel wipe or a bit of thinners
kirk10 Posted February 6, 2008 Report Posted February 6, 2008 if you flated the old paint and made sure it was clean then it sounds like your putting it on to thick to me if its running and holes apearing in it as the solvents pop and try to escape try lighter coats mate and hold can further back
deluxemk1 Posted February 7, 2008 Report Posted February 7, 2008 Yeah use lighter coats mate paint it half as wet.Degrease it first as well.You are more likely to get reaction on the first coat if its to wet.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now