B******!

[Mr.Sumo]

Just been out to try and fit the said Hazard Switch that i mullered....and it don"t bloody fit

 

So , i still need one .....NOW

 

IF IT HELPS , ITS A 7 PIN SWITCH WHICH LOOKS LIKE THIS :

 

0......0

....0

 

0

....0

 

0......0 ( just ignore the full stops )

[Tom]

i bet your indicators don't work with that missing?

 

 

 

 

happened on my brothers one and i had to join the two black/red (i think) wires together and they worked.

 

Get a wire with a fuse holder in it and use it to jump the wires together - if you get it wrong the fuse will blow - and once you've found the right ones your indicators will work.

 

temporary repair mate

[Rick]

have you taken the switch apart? theres usually a load of crap on the contacts

[Mr.Sumo]

i bet your indicators don't work with that missing?

 

 

 

 

happened on my brothers one and i had to join the two black/red (i think) wires together and they worked.

 

Get a wire with a fuse holder in it and use it to jump the wires together - if you get it wrong the fuse will blow - and once you've found the right ones your indicators will work.

 

temporary repair mate

 

I"ll try that tommorow Tom...your right , i have no indicators

 

Cheers Rick , but the switch i bought actually is bigger than the black bit it supposed to go in

[Rick]

:-S i couldnt find one myself until i came across a car with one in, the same 7 pin thing.

 

i got it from a 1300xl if that helps

[Mr.Sumo]

:-S i couldnt find one myself until i came across a car with one in, the same 7 pin thing.

 

i got it from a 1300xl if that helps

 

Might be the problem i have then , but mines a 1300L