Guest cortinamad-gonetoo Posted August 12, 2008 Report Posted August 12, 2008 is there a simple way to fit a rachet and pawl it took me 4 hours to get the flaming thing in only problem is its got to come out again when i get a new rachet because mine broke where the spring connects to it so i drilled a hole in it to hook the spring in so i can use it while the new ones arriving
bortaf Posted August 12, 2008 Report Posted August 12, 2008 Take the peddel off, re-assemble with the spring on the ratchet bit NOT through the peddel end, fit it back then using some strong wire over the bottom hook of the spring and down through the peddlel (wrap around a screwdriver or sumink) pull the spring down and through the peddel
Guest cortinamad-gonetoo Posted August 12, 2008 Report Posted August 12, 2008 thats what we did in the end its still King hard though alot of fingers and thumbs and not much room
caprinerd Posted August 12, 2008 Report Posted August 12, 2008 the way i use to do it was to turn my self upside down on the drivers seat with a lamp on me head
mk3cokebottle Posted August 12, 2008 Report Posted August 12, 2008 i had this problem with my last granada the fooking thing kept breaking so i put a bolt through it instead of using the ratchet
Guest cortinamad-gonetoo Posted August 13, 2008 Report Posted August 13, 2008 i had this problem with my last granada the fooking thing kept breaking so i put a bolt through it instead of using the ratchet put a bolt through where im curious
bortaf Posted August 13, 2008 Report Posted August 13, 2008 Tgrough the top of the peddle to push against the ratchet and hold it where you want it to be. Personly i think it's easyer to fit a Mk3/4 peddle and manual cable but they can be hard to get.
Guest cortinamad-gonetoo Posted August 14, 2008 Report Posted August 14, 2008 Tgrough the top of the peddle to push against the ratchet and hold it where you want it to be.Personly i think it's easyer to fit a Mk3/4 peddle and manual cable but they can be hard to get. i had thought of getting a mk4 pedal and cable do i need the complete mk4 pedal box as the return spring clips on in a different place
Guest cortinamad-gonetoo Posted August 16, 2008 Report Posted August 16, 2008 King thing tried to fit my new rachet and pawl last night thinking it would be a little easier now ive done it once why are they such fookers to fit i got it all in but the pawl slippeds off the end and i had a pedal but it was tight and right past its limit so off it all came again anyway three hours later its on now
emu Posted August 16, 2008 Report Posted August 16, 2008 Tgrough the top of the peddle to push against the ratchet and hold it where you want it to be.Personly i think it's easyer to fit a Mk3/4 peddle and manual cable but they can be hard to get. I know its a long shot, but would a late model escort pedal not fit? They used the main part of the quadrant but with a big allen key headed bolt through the front face of the pedal 'arm' so you could adjust the slack in the cable/the height of the pedal. It probably isnt even close, but you never know!!!
Savvi Posted August 16, 2008 Report Posted August 16, 2008 You used to be able to get a manual adjustment kit from the motor factors like Cafco ? Long time ago but i used to fit these on the side of the road when i was an Rac Patrol never liked doing them though You can also space the cable out by using a big nut on the gearbox end to get you home if the teeth go, it moves the ratchet around so the teeth meet further up away from the broken ones. Another trick if replacing the cable pull the pedal upwards 1st, this releases the ratchet making it easy to fit the cable at both ends.
Guest cortinamad-gonetoo Posted August 16, 2008 Report Posted August 16, 2008 You used to be able to get a manual adjustment kit from the motor factors like Cafco ? Long time ago but i used to fit these on the side of the road when i was an Rac Patrol never liked doing them though You can also space the cable out by using a big nut on the gearbox end to get you home if the teeth go, it moves the ratchet around so the teeth meet further up away from the broken ones. Another trick if replacing the cable pull the pedal upwards 1st, this releases the ratchet making it easy to fit the cable at both ends. how did the manual ajustment kit fit on ?
Savvi Posted August 16, 2008 Report Posted August 16, 2008 If you look towards the bottom of this page although this is a Mustang it will give you an idea ? http://www.thefordsource.com/store/moto ... _trans.htm Edit: Just found this http://www.fiestaturbo.com/forums/clutc ... -vt120871/
bortaf Posted August 16, 2008 Report Posted August 16, 2008 Mk6 escort still uses a clutch adjuster AND a bolt to set the peddle height, and trust me, you think Mk5 corty are hard, you try doing a Mk6 escort one and you will appreciate how easy the corty one is !
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now