vibrating_Cake Posted September 30, 2008 Report Posted September 30, 2008 Riiight foookin fords... shock absorber has died--- boingy boingy ohhh what a day. lol anyway thats me being stupid, the front shocks on my capper have gone, but i can only buy INSERTS.... last time i had the struts off i couldnt work how to replace these inserts.... anyone got a guide on how to do this, with pics if possible, bearing in mind the inserts have been in there years and i dno how to get them out!!!! capri 2.0 front standard inserts need changing on struts lol (fyi)
Retro-gone. Posted September 30, 2008 Report Posted September 30, 2008 i changed mine recently mate, pretty straight forward , how far have you got with them? pm me if ya like..
5hane Posted September 30, 2008 Report Posted September 30, 2008 there REALLY easy, but the retaining bolt on the top it quite big.. and VERY weak .. used a vice and one of them G clamps you could do it without stripping it really, just remove the spring, and the top of the insert, then you will see a very large bolt, un-do that and then slide it out but the retaining bolt is quite hard to get of, but once you 'crack' it comes off easy.. and if you buy new inserts (i got gaz) they should come with a new retaining bolt (well gaz' ones do) hope this helps
vibrating_Cake Posted September 30, 2008 Author Report Posted September 30, 2008 there REALLY easy, but the retaining bolt on the top it quite big.. and VERY weak .. used a vice and one of them G clamps you could do it without stripping it really, just remove the spring, and the top of the insert, then you will see a very large bolt, un-do that and then slide it out but the retaining bolt is quite hard to get of, but once you 'crack' it comes off easy.. and if you buy new inserts (i got gaz) they should come with a new retaining bolt (well gaz' ones do) hope this helps looking for koni ones to match the rears . also they are £117 quid whoop (for both!)! i havent started yet, any pics of where the retaining bolt is? i couldnt find it the last time i was gonna do the shocks but gave up after faffing with them for so long my fingers hurt lol
5hane Posted September 30, 2008 Report Posted September 30, 2008 £117 FOR BOTH i payed £200 for mine err, i havent got any pic's ok when you take the spring off, you should see where the shock goes into the strut, its just above the bottom .. err.. lets call it 'boot' (where the spring goes) , if its like mine it will be surrounded by rust and crap. ill try get some pic's in a min m8
5hane Posted September 30, 2008 Report Posted September 30, 2008 ok, here you go, they have been total stripped, nd this is the nut i got with the shocks, not the originals (silver bit is retaining nut, the hole has the insert going through it) also while ur a it you can upgrade to coilovers (grind off the 'boot' and weald the threaded sleve over the strut, nd weald )
5hane Posted September 30, 2008 Report Posted September 30, 2008 o also, when you take it out, be carefull not to loose the little rubber seal
vibrating_Cake Posted September 30, 2008 Author Report Posted September 30, 2008 ohhhhhhhh thats why i coudlnt find the bugger!!! easy now!!! ill certinally be getting them ordered now!!! btw search for erm... 1mo ill find where i found em first
vibrating_Cake Posted September 30, 2008 Author Report Posted September 30, 2008 larkspeed for the struts, they are koni's iirc
5hane Posted September 30, 2008 Report Posted September 30, 2008 pleas dont the moneys gone now nah im joking im happy with mine
vibrating_Cake Posted October 8, 2008 Author Report Posted October 8, 2008 riiight... the larkspeed ones were 117 quid PER SIDE!!! so thats a lot of money i dnt wanna be spending... soooo... next best things i need your opinions on shocks... between bilstien 260/60 inserts £85 EACH http://peterlloydrallying.co.uk/product ... c078294e4e and GAZ ajustable inserts £67.70 EACH (not sure on the ratings here) http://www.rallydesign.co.uk/product_in ... ts_id=8638
caprinerd Posted October 8, 2008 Report Posted October 8, 2008 ive got spax inserts and find them better than billies but i think its a case of your money take your choice
BIG G Posted October 8, 2008 Report Posted October 8, 2008 Bet it was the anti dive kit that buggerd your shocks on a serious note the bodies are different for the billy inserts. Gaz have the reputation at the mo amongst clubman rally circles good stuff
vibrating_Cake Posted October 8, 2008 Author Report Posted October 8, 2008 Bet it was the anti dive kit that buggerd your shocks on a serious note the bodies are different for the billy inserts. Gaz have the reputation at the mo amongst clubman rally circles good stuff so billy inserts wont fit in a std 2.0 capper strut? haha yeh that damn anti dive kit, shame!
BIG G Posted October 9, 2008 Report Posted October 9, 2008 Nah you need 2.8 front struts for billys as the leg bodys are different. Gaz would be my best bit.
vibrating_Cake Posted October 9, 2008 Author Report Posted October 9, 2008 Nah you need 2.8 front struts for billys as the leg bodys are different. Gaz would be my best bit. lmfao at ur sig!!!
vibrating_Cake Posted October 20, 2008 Author Report Posted October 20, 2008 HELLPPP!!!!! got my new GAZ shock inserts on order... but i need to get the old ones out in the first place. mine dont have a bigg ass nut on the top... it has a square thingy with notches in.... how do i get this off????? without the right tool of course. AND which way do i turn it to get it off, clockwise or anticlockwise??? looking at it from the top!
escort21 Posted October 20, 2008 Report Posted October 20, 2008 Put the strut in a vice with soft jaws and get a badass pair of stilsons on the nut and undo it anticlockwise
vibrating_Cake Posted October 20, 2008 Author Report Posted October 20, 2008 ohhhhhh grrr, i cant be bothered getting the strut fully off lol, its such a pain to get it back on again . oooh could try stilsons while its on the car!!!! good plan
5hane Posted October 20, 2008 Report Posted October 20, 2008 ohhhhhh grrr, i cant be bothered getting the strut fully off lol, its such a pain to get it back on again .oooh could try stilsons while its on the car!!!! good plan eh !??! you sure !! i put mine in a vice and my m8 undid it with some fat molegrips
vibrating_Cake Posted October 20, 2008 Author Report Posted October 20, 2008 yehhhhhh but im lazy and the last time i took the strut off i couldnt get it back together again lol
escort new boy Posted October 20, 2008 Report Posted October 20, 2008 by a C spanner about £4 will fit that
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now