Jump to content

Recommended Posts

Posted

ive been asked to fix a mates car and one of the few problems it has is the heater dont work

 

looking at it i assume most of the dash will need to come out to get good access to the heater....is this correct?...or is their a common fault with these not working? he said it keeps blowing fuses but i put one in and it didnt blow ...but the fan never switched on

 

thanks in advance :thumbsup:

Posted

not just epic fail

 

 

EPIC FOOKIN FAIL!!!!

 

 

your sig that is :lol: sorry no use apart from the mk5/6 escorts i hate with a passion having owned one :shock:

Posted

RECARO'S ARE OK..

THE ENGINE'S ARE.. OK IN SOME OF THEM (THE 1 I HAVE), AND POSSIBLY THE WHEELS.. BUT... I AGREE WITH KEV... AMOLOTOV COCKTAIL IS THE PREFERED METHOD OF REPAIR

Posted

i think the are ok.....it just has no fan blower......he has been using a ciggy lighter12v heater for his hot air :lol: ..has long has the whole dash dont have to come out & get good access to the fan ill be happy :thumbsup:

Posted
i have a mk5 i am about to scrap if you need the heater :thumbsup:

 

does it run ? what colour is it ? is it rusty ?

 

please say yes and the colour is blue as i will need the front bumper and the rear bumper and the rear shocks n springs ........ i can pick up whenever or if easier give ya scrap money and take the lot so i can race the shell afterwards :wink:

Posted
i think the are ok.....it just has no fan blower......he has been using a ciggy lighter12v heater for his hot air :lol: ..has long has the whole dash dont have to come out & get good access to the fan ill be happy :thumbsup:

 

go underneath the passenger side footwell undo the heater fan box bit fing and take the twigs n leafs out of the fan cos if it is overheating the fan because it is jammed fuses blow , if said action doesnt work take heater controls out of the front of the dash (easy four screws) on the back of the 1 2 3 4 selection there is a selection of 4 different height metal pins make sure said pins are corrosion free as damp gets in there and fooks em , if second action doesnt work then just rip old fan box out n replace with one from a scrappy about tenner .............

 

if that doesnt work or if you cant be arsed with it then refer back to the big mans suggestion and by a bottle of cheap vodka insert rag and light , fook through the window and run before he see's ya do it :wink:

Posted

cheers.......all fixed now.....tried to get to the fan......fook that to much hard work......they certainly make it a git to get access......turns out the main wire from fuse box to the switch was the fault prob a dry solder joint.........couldnt locate the wire from the fuse box so i wired in a new + feed and it works :D

 

cheers peeps :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...