evildave Posted September 24, 2009 Report Share Posted September 24, 2009 http://www.letstorquebhp.com/calculator.asp anyone tried this vs actual results? quite a few forums are finding the predicted outputs fairly close to measured runs up the strip. not sure what the hidden calcs behind it are but there must be a pre determined modifier for high BHP and RWD. still kept me occupied for a few minutes Link to comment Share on other sites More sharing options...
SmokeEm Posted September 29, 2009 Report Share Posted September 29, 2009 If our stripped out Cappa weighs in at 950kg then it's fooking accurate However, it can't pre-determine gearing as if we changed diff ratios, we'd drop a few tenth's on the strip Link to comment Share on other sites More sharing options...
Toby Posted September 29, 2009 Report Share Posted September 29, 2009 http://www.letstorquebhp.com/calculator.asp anyone tried this vs actual results? quite a few forums are finding the predicted outputs fairly close to measured runs up the strip. not sure what the hidden calcs behind it are but there must be a pre determined modifier for high BHP and RWD. still kept me occupied for a few minutes What did you run? It wasn't great with mine. It was up to 0.5 slow in places, but high on the mph - not bad though, true Link to comment Share on other sites More sharing options...
evildave Posted September 30, 2009 Author Report Share Posted September 30, 2009 done both my cars......... guessed the mk2 weight, but will be getting it down the local weighbridge next week. scoob is very close to book figures. Mk2: Power at Flywheel (BHP) : 195 Weight without Driver (KG) : 750 Power to Weight Ratio (BHP Per Ton) : 264.17 0 - 60 (Secs) : 4.45 0 - 100 (Secs) : 11.47 60 - 100 (Secs) : 7.02 Quarter Mile (Secs) : 12.85 Terminal Speed (MPH) : 105.84 Drag Strip Quarter Mile (Secs) : 12.75 Drag Strip Terminal Speed (MPH) : 107.10 Scoob: Power at Flywheel (BHP) : 303 Weight without Driver (KG) : 1260 Power to Weight Ratio (BHP Per Ton) : 244.34 0 - 60 (Secs) : 4.20 0 - 100 (Secs) : 11.12 60 - 100 (Secs) : 6.92 Quarter Mile (Secs) : 12.90 Terminal Speed (MPH) : 107.71 Drag Strip Quarter Mile (Secs) : 12.50 Drag Strip Terminal Speed (MPH) : 111.29 Link to comment Share on other sites More sharing options...
Toby Posted September 30, 2009 Report Share Posted September 30, 2009 Good times if the escort will do them Get it up / down to Pod at some time - see what breaks! Link to comment Share on other sites More sharing options...
surrey_100e Posted September 30, 2009 Report Share Posted September 30, 2009 that is pretty damn accurate Link to comment Share on other sites More sharing options...
mk1mexico Posted September 30, 2009 Report Share Posted September 30, 2009 Think the mk2 will be a little heavier than that EvilDave Link to comment Share on other sites More sharing options...
twincamden Posted September 30, 2009 Report Share Posted September 30, 2009 Auw no drag strip over here to see is it accurate Link to comment Share on other sites More sharing options...
Tom Posted September 30, 2009 Report Share Posted September 30, 2009 what does a mk2 escort weigh? *looks for last brake test from mot* bugger - i didn't do one Link to comment Share on other sites More sharing options...
over_head_cam Posted September 30, 2009 Report Share Posted September 30, 2009 what does a mk2 escort weigh? *looks for last brake test from mot* bugger - i didn't do one * 2.0 GL: 925 kg. * RS2000: 978 kg. * Ghia: 1003 kg. * Van: 908 kg. Link to comment Share on other sites More sharing options...
evildave Posted October 5, 2009 Author Report Share Posted October 5, 2009 Just been down the weighbridge, my car weighs 900kg so that's a little less than a van lol. Power at Flywheel (BHP) : 195 Weight without Driver (KG) : 900 Power to Weight Ratio (BHP Per Ton) : 220.14 0 - 60 (Secs) : 5.09 0 - 100 (Secs) : 13.17 60 - 100 (Secs) : 8.08 Quarter Mile (Secs) : 13.50 Terminal Speed (MPH) : 101.22 Drag Strip Quarter Mile (Secs) : 13.40 Drag Strip Terminal Speed (MPH) : 102.40 Link to comment Share on other sites More sharing options...
Toby Posted October 5, 2009 Report Share Posted October 5, 2009 Just been down the weighbridge, my car weighs 900kg so that's a little less than a van lol. Power at Flywheel (BHP) : 195 Weight without Driver (KG) : 900 Power to Weight Ratio (BHP Per Ton) : 220.14 0 - 60 (Secs) : 5.09 0 - 100 (Secs) : 13.17 60 - 100 (Secs) : 8.08 Quarter Mile (Secs) : 13.50 Terminal Speed (MPH) : 101.22 Drag Strip Quarter Mile (Secs) : 13.40 Drag Strip Terminal Speed (MPH) : 102.40 You're going to need a driver Lol! Good though Link to comment Share on other sites More sharing options...
Fiesta Steve Posted October 6, 2009 Report Share Posted October 6, 2009 With a flywheel figure of 153 and a guesstimation of 750 kg mine comes in at 13.88 seconds for a drag strip 1/4 which is absolutely spot on With my new spec it says I'm not going to be fast enough Link to comment Share on other sites More sharing options...
Toby Posted October 7, 2009 Report Share Posted October 7, 2009 With a flywheel figure of 153 and a guesstimation of 750 kg mine comes in at 13.88 seconds for a drag strip 1/4 which is absolutely spot on With my new spec it says I'm not going to be fast enough Might have to go without the pants! What's the new spec? Secret? Link to comment Share on other sites More sharing options...
Fiesta Steve Posted October 7, 2009 Report Share Posted October 7, 2009 With a flywheel figure of 153 and a guesstimation of 750 kg mine comes in at 13.88 seconds for a drag strip 1/4 which is absolutely spot on With my new spec it says I'm not going to be fast enough Might have to go without the pants! What's the new spec? Secret? Bit more cam and a bit more compression and a bit less weight Link to comment Share on other sites More sharing options...
fastferretzetecmk1 Posted October 7, 2009 Report Share Posted October 7, 2009 My cossie van Power at Flywheel (BHP) : 511 Weight without Driver (KG) : 1150 Power to Weight Ratio (BHP Per Ton) : 451.48 0 - 60 (Secs) : 3.34 0 - 100 (Secs) : 7.06 60 - 100 (Secs) : 3.71 Quarter Mile (Secs) : 11.43 Terminal Speed (MPH) : 127.29 Drag Strip Quarter Mile (Secs) : 11.33 Drag Strip Terminal Speed (MPH) : 128. 75 Actual times 11.7 quater mile 129.6 Terminal speed Not Far off Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now