MK2 escort sump guard fitting issue and TCA question........

[X FLOW EDDY]

Hi all.

 

I am just wandering if you can fit a 6mm clubmans sump guard kit to a mk2 that all ready has a full width rally design anti dive kit fitted? Also does anybody know whare i can get hold of any TCA washers for a mk2 escort, the big ones that fit onto the anti roll bar that clamp the TCA bushes together.

[Copey]

they are probably the same as capri ones knowin what ford are like

[X FLOW EDDY]

I think they are Mr copey, does anybody do capri ones

[Copey]

i THINK i may have some capri ones mate, i will have a look, they are used but still alright, coat of paint will be alright

[X FLOW EDDY]

Sounds spot on mate. Just suprised noboby does new ones, rally design only do ones for escort cosworths which are to big

[Copey]

thats annoyin, i will try n find them 2moro and take a couple of pics n measure them for you

[livewire7116]

Have you tried main dealer? think you will find they are same as mk3/4/5 escorts and possibly many newer ford with an arb/tca set up. Dont forget there is a steel sleeve which goes on there as well but if using poly bushes they are normally supplied

 

as for the sumpgaurd the triangular brackets go on the outside of the anto roll bar mounting brackets and should fit your dw kit with no fouling problems, if you have anti dive then the centre mounting point may cause problems depending on what brackets you have.