Door pins

[samurai]

I have some new door pins but how do you get the old ones out?

 

Is there a magic tool?

[Slammed]

if my memory serves me right there is a tool to remove door pins, i think its on ebay? wi ill see if im right though

[Slammed]

http://cgi.ebay.co.uk/Door-Hinge-Remove ... 45e8f2337f

 

bit expensive, but im sure other peeps will come up with some answers too

[samurai]

Hammer time

[MM77]

Get it off Goughie mate.

Bought HEAPS of stuff off him and he's always been great

 

http://cgi.ebay.co.uk/HINGE-PIN-REMOVIN ... 1e5965e317

[In The Pit]

Use plenty of WD40, take the bungs out (if they are still in) and spray loads of WD40 in atleast 24 hours before you start.

[MM77]

And support the rear of the door on stands/bricks/etc to take the weight off the pins.

[samurai]

They are loose as hell anyway

 

Abit of wd and a few good wacks with the hammer and should be out

 

[birdy]

Tried to do this years ago without the tool and ended up driving my capri around with a phillips screwdriver stuck in the hinge. Never had any more trouble with that door though. If you can borrow or hire the tool do it cos it's cheaper than replacing half your screwdrivers. You can always try making the tool, long nut and bolt and a bar with a slot in it.