chunkys mk1 Posted January 24, 2010 Report Posted January 24, 2010 i have bought a breather elbow tha goes into the block from burton but it hits the side of the block and will not fit there were only 2 types listed 681or 711 blocks and mine is a 691m so i choose the 681 is this correct and has any one had probs fitting one,any pics would be good so i can see one fitted
RossMK2 Posted January 24, 2010 Report Posted January 24, 2010 i got similar probs i gt a 691m too for example followers
chunkys mk1 Posted January 24, 2010 Author Report Posted January 24, 2010 nice to know its not just me i am going to call burton tomorrow and see if they can shed any light
RossMK2 Posted January 24, 2010 Report Posted January 24, 2010 was meant to ask at autosport show on burton power but forgot question
chunkys mk1 Posted January 24, 2010 Author Report Posted January 24, 2010 will let you know what they say
chunkys mk1 Posted January 25, 2010 Author Report Posted January 25, 2010 spoke to burton today and there are only two types made so i ether have to modify it to fit or send it back so anyone with a 691m please be aware
Noodles Posted January 25, 2010 Report Posted January 25, 2010 I found the burton breather was a bit small I used a cossie one in the end it comes straight out the block rather than a angle
RossMK2 Posted January 25, 2010 Report Posted January 25, 2010 will probz make my own in that case thanks
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now