lurch914 Posted March 29, 2010 Report Posted March 29, 2010 i eventually got the mex moted and taxed on saturday flew through the mot so i was pleased, took it out for a drive yesterday and it felt great just being to go out in it, its the first time i`ve drove it since i got it, it drove nice and tight and the standard engine didnt seem to go to bad either, the only thing i found wrong was the clutch is slipping abit, does anyone no the best place to get a new clutch from
john_3.0s Posted March 29, 2010 Report Posted March 29, 2010 if it has the hyd clutch are you sure there has been enough play set on the adjuster rod? there should be quite a bit about 1/2 to 1 inch ish. If its too tight it will slip a bit esp under load. If it needs a new clutch then any decent auto factor will be able to sort you out
lurch914 Posted March 29, 2010 Author Report Posted March 29, 2010 if it has the hyd clutch are you sure there has been enough play set on the adjuster rod? there should be quite a bit about 1/2 to 1 inch ish. If its too tight it will slip a bit esp under load. If it needs a new clutch then any decent auto factor will be able to sort you out cheers didnt think of checking that i`ll have a look at the weekend see if that makes a difference
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now