quick question about type 9 and xflow

[tom28]

hi all,

 

im fitting a type 9 5spd to me 1700 xflow, just need to know if this clutch is the right one for the job, might be a dumb question but just wanna be sure, link to clutch -

 

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123

 

thanks

[mk2 matt]

No

You want a clutch for a 1.6 pinto

[Stu_B]

It's the right No. of splines to fit the gearbox but I think the diameter is too big for a crossflow flywheel.

 

When I was fitting a pinto box to a precrossflow I used an AP racing plate (190mm Dia.) with a standard crossflow cover & matched bearing. Still got the clutch plate unused if you're interested... £30

[Guest cortinamad-gonetoo]

No

You want a clutch for a 1.6 pinto

 

its done it to someone else too

 

im glad its not just me

 

photobucket has removed your pic

[bortaf]

A normal 1.6 clutch wont fit cos it has the wronge spline size

you need an avenger clutch plate 23 spline (1.3 or 1.6) with the same dia as the Xflow flywheel and clutch cover but with the 23 splines the larger plate has or an early Sierra 1.6 5 speed clutch, they only used this for 3 years before all 5 speed 5ierras got the larger 2.0 clutch

QH part number c784af also found in some scimitar ss1s

[Stu_B]

A normal 1.6 clutch wont fit cos it has the wronge spline size

you need an avenger clutch plate 23 spline (1.3 or 1.6) with the same dia as the Xflow flywheel and clutch cover but with the 23 splines the larger plate has or an early jelly mould 1.6 5 speed clutch, they only used this for 3 years before all 5 speed 5ierras got the larger 2.0 clutch

 

Thats what my AP plate is, 23 spline 190mm Dia & uprated

[tom28]

thanks people

[Billy_smith]

It's the right No. of splines to fit the gearbox but I think the diameter is too big for a crossflow flywheel.

 

When I was fitting a pinto box to a precrossflow I used an AP racing plate (190mm Dia.) with a standard crossflow cover & matched bearing. Still got the clutch plate unused if you're interested... £30

 

How much was the AP racing plate? cheers

[Stu_B]

Think it was £60 from Burtons. Its sat in my garage in the box cos I ended up fitting a 2000e box.