Jump to content

bodywork question help with a dent


Recommended Posts

Guest cortinamad-gonetoo
Posted

swhats the best way to deal with this dent

 

its a outward dent

 

i tried rubber mallet and normal hammer with a piece of flat wood

 

is it a case of knocking the dent right in and filler and skim flat

 

its annoying me

 

86f8a5dbb95d.jpg

Posted

Get a blunt plastic implement, such as the end of an upturned screwdriver, place it on the dent and GENTLY tap the metal point of the screwdriver with a ballpein or similar hammer. Do not try to remove the dent in one hit, just keep tapping it gently steadily increasing pressure over a period of 20-30 taps...It will minutly decrease with every tap, therfore minimising or even completely removing the need to fill.

If the dent is not just a high spot, but a 'long' dent, keep moving the end of the screwdriver over and along the dent, as you tap it.

It will take time, you should be aimong to spend at least 10 mins on a dent like that, but GENTLY !!

Guest cortinamad-gonetoo
Posted

cheers but one problem i think i have every typr of hammer but a ballpein one

 

will a mormal small hammer do ?

Posted

Yes, but GENTLY, GENTLY...Each minor tap, will decrease the dent by the smallest invisible amount, but it will take time.....Spend at least 10 mins, it could take upto 50 taps or even more to do :thumbsup: it, Just do'nt whack it..nice and easy...

Guest cortinamad-gonetoo
Posted

ok cheers i will try tomorrow depending on the weather :thumbsup:

Posted

hi if you have access to a dolly[oblong shaped thick piece of metal if you dont no what one is]place it on the inside over the dent then use a flat hammer with some masking tape over wrapped over it as not to damage paintwork and gentlly tap it in.you'll still have a few ripples but thats your only option without filling and spraying it.

Guest cortinamad-gonetoo
Posted

i didnt know what one was

 

but i couldnt do that as its impossible to get to the back of it theres a strengthening thing behind it

 

i dont know what you call it (its the inner frame of the bonnet )

Guest cortinamad-gonetoo
Posted
seems like your knackered then mate you'll have to hit it in with a pointy hammer and skim it over and paint it.sounds easy but i do it for a living. :)

 

youre welcome to do mine you can finish the whole bonnet because it does my head in i hate bodywork :mrgreen:

Guest cortinamad-gonetoo
Posted
put a sticker on it

 

no thanks :mrgreen::thumbsup:

Posted

the first dent on the misses car annoyed the feck out of me but after that i never bothered,i cant even wash it now it just annoys me how much it cost and the fact she doesn't care

some of these dent master guys are good at matching dents like u got there and usually under a ton

 

l8r Bill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...