Jiffer Posted July 4, 2010 Report Posted July 4, 2010 now in the cold light of day I have just had a look at the welding I attempted yesterday after what can only be described as a healhty amount of beer, and its not looking good I've tried welding sober and hammered and as far as I'm concerened its all done with voodoo and trick photogaraphy. off out now for a few beer and take comand of the pool table at least I know I can do that
emu Posted July 4, 2010 Report Posted July 4, 2010 have a read through here, it might be helpful http://www.mig-welding.co.uk/
over_head_cam Posted July 4, 2010 Report Posted July 4, 2010 There must be someone near you that could spend a couple of hours helping to get you started? Once you get the 'feel' for it there will be be stopping you
Jiffer Posted July 5, 2010 Author Report Posted July 5, 2010 There must be someone near you that could spend a couple of hours helping to get you started? Once you get the 'feel' for it there will be be stopping you good ol mr Bagel is coming round to weld up my steering joint and empty my fridge I used to do a lot of stick welding on steel fab buildings (over 20 years ago) but just can't seem to get to grips with mig
over_head_cam Posted July 5, 2010 Report Posted July 5, 2010 It's a piece of piddle once you get the hang of it Just do loads on some scrap and you'll see what works and what doesn't
smudger666 Posted July 5, 2010 Report Posted July 5, 2010 a good quailty mig welding machine can do wonders for the quality of your welding! clean the metal to bare shiny steel before you get going... and make sure there is a good fit between the pieces you are tring to weld don't try to bridge big gaps with blobs of weld
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now