Anyone had trouble with Bias Peddle Boxes???

[Retromotorsport]

well thats funny cos mark showed alwyn how to do them in the first place

 

And people ask me what camber/castor/spring rates i use.... wether they get the correct answer or not depends on if i built the car

[105Ian]

I have the master cylinders mounted upside down on my pedal box due to lack of space , once bleed out they work fine .

But have to say they where a pain in the arse to bleed out and if I had a way of changing them so they could be mounted normally I certanily would .

 

Ian..didnt we go 60 degree AP's ...

 

 

They are just normal girling cylinders mounted upside down , don't you remember the fun we had holding the pedal box upside down while getting someone to push the pedal untill 11 oclock at night .

 

If I had 60 degree AP's would they all bleed out normally ?

 

Have looked at them on Demon tweeks site and there are lots of different options and says 52 days delivery so may have to ask you to have a look for me to help make sure I get the right ones .

 

Cheers Ian

[Retromotorsport]

I'm sure i mentioned the 60's after that night ... i'll have to try and locate one for you to have a looksie .. think Andy P may have one in his stores

[105Ian]

Pretty sure you did metion them that night , but have to say after finally getting to drive the car properly for the first time that night I was to excited to remember anything

 

If you can get hold of one would be good to check it and pop down for a kebab

[vibrating_Cake]

Just a top tip... when i got the capri bias pedal box done, i send off the std capri pedal box to peter lloyd, and they cut, welded, tested, fitted master cylinders, set up the bias bar and everything so all i had to do was plumb it in, they even put a notch in the accelerator pedal and powdercoated it.

Never once had a problem with it!

[Guest]

I got so annoyed with skinning my knuckles getting to my pedal box I threw it in the bin and fitted floor mounted pedals from Tilton.