PaulMags Posted July 24, 2011 Report Posted July 24, 2011 Does anyone know if there is a specific way to bleed these brakes?
Skimmer Posted July 24, 2011 Report Posted July 24, 2011 Ive got them on my van and there the worst brakes ive ever bled up it was a couple of years ago but i think me n me lad bled them something like 15 to 20 times each time thinking job done even using the pressure bleeder i know you have to do all the nipples as some say just do 1 on each side ......i dont have the secret formula to this more luck than judgement , ill follow this thread to see if anyone is an expert
MK2Ed Posted July 25, 2011 Report Posted July 25, 2011 You should get there in the end, as said, you'll need to bleed each nipple...
oldschoolrules Posted July 25, 2011 Report Posted July 25, 2011 i dont understand why you have to bleed each nipple. i presume people are talking about the midilite type with 4 bleed nipples, two top and two bottom. surely this is so the caliper can be more universal, mounted any way up on any side of the disc and still be able to be bled easily. it means they only have to make one caliper that will fit both sides. the caliper only has one inlet, on the side, and from this one inlet fluid is able to get to the back of each piston. so if the fluid goes in and gravity takes the fluid to the lowest point it will gradually fill until there is air trapped at the top of the top pistons. open the top two bleed nipples and bleed as normal. ive never had a problem bleeding my midilites. i would be interested to strip one down and see where the drillings are between each cylinder.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now