Pic request please

[Tall paul]

Has anyone got any pics of under the bonnet of a mk2 escort fitted with 40's on a 1.6 xflow with the brake servo still fitted? Cheers

[lurch914]

heres mine its a mk1 but its pretty much the same, this is what i done been told mk2 should be the same, undo the servo mount push it down so the top hole is at the bottom one then redrill the new bottom hole and it will clear

[Mad Mex]

as above mate...done this on my Mk2 however it helps greatly if you have a angled inlet manifold (not sure you can lower the servo tower enough with a straight/low angled inlet)and also when u push the servo tower down check the hole by your pedal box where the brake rod pass's through, you may need to elongate this hole as it will limit the amount you can lower the servo by and you may not be able to push the brake pedal down:thumbsup:

 

cant post pics up as at work but same as above really...

[mk1super]

I think the 1300 x flow twin carb manifold clears a servo, due to angle and its shortness. i maybe wrong

[Tall paul]

Thanks for the pic, great help

 

We have the same manifold as your one which is angled.

 

We have been told that the 1.3 xflow one will fit without modding the servo tower but there £130 so modding the tower it is, thanks for the help

[mk1super]

Thanks for the pic, great help

 

We have the same manifold as your one which is angled.

 

We have been told that the 1.3 xflow one will fit without modding the servo tower but there £130 so modding the tower it is, thanks for the help

 

 

F**k! Price of parts is getting bloody daft...Nowt on ebay?

[Tall paul]

Haven't looked to be honest, we're fitting them this weekend so times abit short at the min.

 

I'll let you know how we get on