6" lotus steels on an anglia 105e

[Harry105e]

Hi

 

I am thinking of getting 6" lotus steels for my anglia 105e and was just wondering if anyone here has had any troubles with fitting them, like is there any problem when you lower the car etc ? 

 

Cheers

 

Harry

[piekey]

Harry

Lotus steels are 5.5" wide (not 6")  Depending on tyre size, you may require trimming the front edge of the front arch (for turn in )

[katcat2010]

they will fit on the rear, lowerd or not without an issue Harry but the front is a whole different story. if you still have the standard struts with drums you need a small spacer (quarter inch if i remember correctly) to stop the tyre rubbing on the body of the struts,which means longer wheel studs will be needed. you will also need to trim the front edge of the arch if you lower it. most lotus steels are 5.5j but a few wider ones were made. hope this helps mate. its worth the work to make them fit as they look the nuts on an anglebox

[Harry105e]

Ok cheers for the help will look into it !