cledus
Members-
Posts
70 -
Joined
-
Last visited
Content Type
Profiles
Forums
Store
Events
Everything posted by cledus
-
ROUTE 38 (CORNWALL) COMING SOON ... MAY 3RD (PAGE 27)
cledus replied to Mrs O/H/C's topic in SHOWS, EVENTS & MEETS
Mrs Leadfoot, With a following wind, the Mk1 Cortina will be MOT'd and ready to go for the meet. Me and the Rebel MC will be attending. Rebels Mk2 is not ready yet, so we will be in mine. -
I've got a fly-off handbrake from TAS (Tasuka Aluminium ????), and it has hydraulic cylinder and cable mounts to satisfy MoT. There is an article in CF somewhere where they fitted a hydraulic handbrake, and ran a cable. I'll see if I can dig it out.
-
Me too. Go for it.
-
They are very similar to Dunlops, but I don't think that they are. I had a set of Dunlops on my Escort about 15 years ago, and they were different to those. Saying that, I haven't got a clue what they are.
-
My missus informs me that we are away this weekend. One weekend of the year when I'm away and there's no getting out of it. I'm gutted, as I would really like to support this. Would have been the first outing for the Cortina. RebelMC says he will be there in his Mk2 Rat Look Cortina, hopefully bringing along a couple of his mates. Hope it goes well.
-
Should be able to make this. Will confirm ASAP.
-
Kent Vintage Trim are the only place I have found that do them. They are not very good quality (I uised to make rubber seals for modern shite), and they suffer badly from shrinkage/cracking in the corners. They'll do you for a couple of years though.
-
Do you mean the tin balls that you put in a fuel tank or an in-line catalyst? I used the balls in the tank many years ago for about three years with no effect on exhaust valve seat recession. Have never used the in-line system. Now all my heads have hardened exhaust valve seats and run super unleaded with no problems. If you're not sure, a while ago the Federation of British Historic Vehicle Clubs commissioned a study into additives to replace lead in unleaded petrol. It may be worth trying to find something on this on the net if you're serious.
-
They are not needed for trackdays or hillclimbs/sprints. The last time I looked, they are needed if you want to RAC logbook the car for stage rallies.
-
Worth checking out 'On The Limit Rallying' every week on Men and Motors, as the Mk2 Challenge and various Mk2 rallies feature quite often. It is repeated at 1 am Thursday morning for those who missed it.
-
Don't sell it. You will regret it big time. If you are determined to sell it, I would stick it up for 7.5 as you say. See what happens.
-
Yeah, I'd be up for that. Car is not quite finished. Went to change the rear oil seal on the 2000E box and found the tailhousing cracked. Wating for another, and it won't be far away.
-
Mate, Mk 1 cortina owners club - they've even got a picture on the website. £46 a pop though.
-
Seats - I have fitted various buckets in my mk1 using mounts I picked up from a set of recaros I had. The only issue with them is that they move around a bit when compared with solid mountings. Tank - Mk1 capri tank should fit. Used to be a popular mod on rally escorts in this part of the world. Failing that, the lotus cortina spares centre list a long range racing tank. Just search on google for 'lotus cortina spares centre'. There was no price mind you - probably pretty damn expensive. Pump - I have used a silver top facet pump in both my mk1 escy and mk1 cortina. In the cortina it has been in the boot and under the bonnet. I have never had any issues with it - even under the bonnet where they say you shouldn't fit them because of heat. Lotus badge - as Ratman says - it's your car. How many Mexicos do you see that are not genuine but have the decals? Good luck.
-
Check out Rebel MCs rat look mk2 Cortina in 'The Rat Look' thread. That's running 145lb -2" springs on the front and a set of 2" lowering blocks on the back. Will give you some idea of what you should be aiming for (in my opinion). Page 2 or 3 I think.
-
I love pushrods. Keep us posted.
-
What colours are they available in? Are they on the large side or the small side?
-
I think it sounds about right. I have seen a couple of big power crossflows on the rollers and in action various hillclimb championships. The most I have seen at the wheels is 150 to 155, all steel throttle bodies, running total loss (no alternator), dry sumped. It was an Anderson motor. I have some footage of it launching at a hillclimb on video, and it is unbelievable (I would put it up if I knew how). What plans have you got Mr. Pipe. I hope it is another pushrod!! Good luck with the revised fuelling Harry, and when you move to a Pinto, let me know how much you'd sell your pushrod for.
-
I would stick with pushrod power - real old skool. My Mk 1 Cortina motor features a 711M bottom end, BDA flat top pistons (eliminates the need to deck the block) and a Burton pre- x-flow head. It revved like a good-un with a lightened flywheel on it. It's currently out for a pep up, but when it was on the road, it was really good fun.
-
I take it you've got a HPE pushrod? What spec. mate? Get a spec. up and get some people guessing the power your motor makes. V6 Col did it and got a huge response. Always good to see what spread of figures you get.
-
Sunbeam's all right. What about a Chevette HSR. I know it ain't a Ford, but they're allright.
-
Autoglym Super Resin is good. I've heard Meguiars is good but have not tried it.
-
Mate, I have recently bought a Butters-AMT 170 amp MIG. Lovely little welder. Would recommend it. Check out their website. Also, if you're new to welding, check out mig-welding.co.uk. Cracking site with loads of helpful hints, tips and a good forum.
-
Beautiful. Love the steels.