Jump to content

RChambers

Members
  • Posts

    118
  • Joined

  • Last visited

Everything posted by RChambers

  1. XE: better power as standard Zetec: cheaper to fit (unless you can find 2nd hand XE parts). A zetec with a set of cams is the equal of an XE and are far easier and cheaper to get hold of. If you are going to keep the engine standard the XE is better, if you mod them they are equal, although you can get cheap tuning bits from USA for the zetec so maybe it tips the scales in its favour. Not considered a duratec then? More expensive to fit than the XE or zetec but more power and more potential.
  2. Yep I could do that. What time is everyone leaving as the traffic is going to be manic on the A3 at that time
  3. I can just see Gaz kicking himself now Read Gaz's thread for the trouble this lot will save you if you want to go N/A cossie!
  4. RChambers

    rammstein

    Fooking wicked live
  5. Will be there on Monday taking pics of everyone, holding my crash lid and trying to blag passenger rides
  6. Thats bloody good for a car on twin carbs!! MY 325 Coupe does just over 30mpg although that is at 90 mph rather than 60 My zetec used to be able to push 40mpg on a run (in a mk2 Escort). Watch the fuel economy drop once its run in though
  7. I'm going too to watch and hopefully take some decent photos for everyone. I'm from Aldershot so if anyone is going from the same area, want to convoy?
  8. I'm going on Monday to watch and take picks. Would love a passenger ride if anyone has a spare seat, I'm having Escort withdrawals
  9. The fact is a modern hot hatch is more powerful, faster, more comfortable, more economical and a crap load safer. The only thing that hasn't improved is the fun factor. I'd rather burn round the lanes at 50 mph in my Escort than 80 mph in a modern car. Of course that is comparing like for like. Once you start sorting the suspension out on the old cars and fitting something like a cossie turbo then the modern stuff will have a hard time keeping up. I don't think anyone hear would fancy their chances if they were in a standard RS2000 and came up against an evo or subaru but if you were in something like Retro Al's car then
  10. A LOT cheaper though
  11. Tuesday at Farnham would be ideal for me but I'd definately try and get out any day if its at Farnham. Seeing a load of oldschool Fords might give me the motivation I need to get cracking on mine
  12. 4x4 ones could be converted to rwd easily as they have the rear diff etc. Although its probably not worth it. Could remove the front driveshafts and weld up the 4wd diff though lol
  13. Ah another thread hijack Getting back on topic, I think PPC is by far the best car mag out there and who cares if ONE person had a dig, not everyone likes old Fords and its hardly worth missing out on a great mag for. Beats reading about the same things all the time. Kind of like going to a massive mixed car show and only looking at Fords.
  14. Nice pics but wheres all the pics of the hot rods?
  15. From 12 onwards
  16. Well surely it would be better to join the Turbosport meet rather than compete with it? Lots of people are members of both and if we get both sites visiting at once it will be one massive classic Ford bash with no room for anyone else
  17. Also a meet here on the 1st Sunday on every month too, been going for over a year now and its shared with the AC Cobra owners club for all you plastic haters (dunno how you can ban people with modern cars from a public house car park though lmao).
  18. Same here, and as a bonus the new macs can run windows so you can still play pc games on it. Everything else you are better with mac osx
  19. Run the standard RS tank (the one with a return in the sender) and use a Sierra Cosworth fuel pump and filter in its cradle. You need to mod the fuel tank outlet to a bigger pipe size (drill it out and retap) but otherwise you just bolt the cradle under the boot floor and run your wires and pipes to it . You won't get fuel surge problems unless you run the tank very very low, I used this with my zetec setup and never had a problem even when hooning it round brunters
  20. The company I work for make clutches for marine engines. Done loads of diesel and gas turbine ones and the clutches weigh in about 10 tons not including casing. Military ships are better as they have two diesels for slow speed maneuvers and two gas turbines for high speed work. Our clutches let you switch between them without stopping the boat
  21. Fair play to you I'm supercharging my zetec as we speak so will be interesting to see how the different approaches unfold. I'm using the same supercharger as you but charge cooling it instead and using fuel injection. I'm hoping for 220bhp
  22. "shitty" efi would work far better than carbs if you have the money to convert. I'd say going to cossie management would be your best option. Clint off of Turbosport is the best person to talk to as he did the management for Esme on the overhauling project.
  23. The realistic cost for an easy zetec conversion is about £2000. Thats how much mine cost and thats with Retro Ford bits to get the engine in, Emerald ECU and motorbike throttle bodies on ST170 manifold. You say you like the sound of an xflow on twin carbs at 7000rpm but a zetec sounds just as good... I'm the scabby looking green mk2 racing Gaz's minty blue pinto mk1 Completely internally standard, have it! P.S. from the sounds of your situation the xflow seems like a better bet but you can't really compare the two engines as they aren't in the same league really (really helps having the extra 400cc). Oh and blimey more than 100bhp/litre from a pre-xflow, thats better than most engines that age, not even a pinto can manage that!!
  24. Webers, Dellortos, bike carbs, throttle bodies, if they are one body per cylinder they all sound pretty much the same. My zetec was on bike throttle bodies and sounded awesome, better in fact than my old pinto did on twin carbs. Summing up the situation I'd say: Originality - Webers/Dellortos Budget - Bike carbs Ultimate - Throttle bodies Agree?
  25. Bike throttle bodies are better than both. GSXR750/1000 throttle bodies flow enough air for 400bhp as they are 46mm tapering down to 40mm and you can bore the engine side up to 46mm too if you really wanted. Big bikes have throttle bodies that are bigger than the choke sizes most people use in webers (38mm is most common on a pinto I believe). Hayabusa ones are even bigger again if the GSXR ones aren't good enough
×
×
  • Create New...