Burns Posted June 25, 2007 Report Posted June 25, 2007 ok, going to look at a 1986? tranny camper tomorrow (i guessed at mk3) for a guy i know who's a climber and wants it for when they're at the wall. he's not got an idea mechanically so the details i have are that it's got a 1.7 engine from a sierra, so i'm guessing pinto, if it is, i'll drop a 2.0 in it for him cos he doesn't reckon a 1.7 will have enough power (don't quote me that it's a 1.7, could be anything ) question is, does anybody know where transits usually have problems? he reckons it drives alright but it's a bit vague on the gearchange (dunno if it is or if he's not used to old fords) and he didn't check the electrics ps. it's done 90k apparently
orionmojo Posted June 25, 2007 Report Posted June 25, 2007 if its a mk2 (phased out around that time) the gearchang will b like a sausage in a top hat. not too sure about the mk3. i have no idea about the engine, but the mk2's were Apple Pies for rusting everywhere, particularly the frint inner wings. the mk3's, around the rear doors and front floorplan. i know thats rally vague also, so sorry
Burns Posted June 26, 2007 Author Report Posted June 26, 2007 nah, that's good thanks i've seen a pic and it's deffo later than mk2, just wanted a vague idea of what i'm looking for thanks dude
andrewg1323 Posted June 26, 2007 Report Posted June 26, 2007 i thought the only 1.7 ford ever did was the puma? Could be a 1.8 CVH in which case yup pinto it!
Burns Posted June 26, 2007 Author Report Posted June 26, 2007 yeah, he reckons it's a 1.7 but tbh it could be anything from a 1.5 to a 3.0 and is the cvh to pinto a bolt in job?
andrewg1323 Posted June 26, 2007 Report Posted June 26, 2007 Ish At 1986 it may have the electronic dizzy which may not work with the pinto due to it connecting to the engine differently Manually wiring the engine in a pintos not rocket science though!
Burns Posted June 26, 2007 Author Report Posted June 26, 2007 oh yeah, wiring's no problem, does it use the same engine mounts though? cos i'm crap with fabrication
andrewg1323 Posted June 26, 2007 Report Posted June 26, 2007 Dont think so but would be easy to just get a set of transit ones Somethings telling me the CVH is wider than the pinto
Arched Escy Posted June 26, 2007 Report Posted June 26, 2007 Maybe it has 1.7 bhp thats what he means. Could be a 1.8 Pinto.Dunno if they were used in Transits though.
Burns Posted June 26, 2007 Author Report Posted June 26, 2007 cheers for the help lads, it had a 205 block pinto in it after all that little bit crusty but for £1500 can't really complain, he's already named it "the hog" after i suggested he called it "smokey" and his little skoda "the bandit"
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now