4parajon Posted November 13, 2007 Report Posted November 13, 2007 Made this the other day to fit on the inside of the wing next to the strut to stop the fine mist getting everywhere, got the filter for a fiver from gaybay.
Mick The Mig Posted November 13, 2007 Report Posted November 13, 2007 Did a similar thing on "noodles" pinto powered escort. Found that filter caused to much back pressure, had oil pissing out of everywhere. Had to drill extra holes in top to solve problem.
Mick The Mig Posted November 13, 2007 Report Posted November 13, 2007 Sorry meant to say nice bit of fabrication,
Admin Mk2Jo Posted November 13, 2007 Admin Report Posted November 13, 2007 Ooh, nice shiny things Very nice and very bespoke mate Not so sure about the woodchip wallpaper
4parajon Posted November 13, 2007 Author Report Posted November 13, 2007 Not so sure about the woodchip wallpaper Its my office not a boudouir
james p Posted November 13, 2007 Report Posted November 13, 2007 looks good mate but lose the filter and run a tube straight to the road or a easy removable bottle as the filter wont be thre long
Admin Mk2Jo Posted November 13, 2007 Admin Report Posted November 13, 2007 My filter has stayed on for the past 11 months
MK2Ed Posted November 13, 2007 Report Posted November 13, 2007 Yep, done good... Cause you don't need some of those expensive large things for sale at £60 - £100
BlueMerlin Posted November 13, 2007 Report Posted November 13, 2007 Made this the other day to fit on the inside of the wing next to the strut to stop the fine mist getting everywhere, got the filter for a fiver from gaybay. I can see a problem with this... I hope the capri is bigger than the escort
caprifan Posted November 13, 2007 Report Posted November 13, 2007 very nice mate so your not just a bender
johnny_h Posted November 13, 2007 Report Posted November 13, 2007 Very nice work John, i'd love the facilities to be able to do that. Love a bit of tungsten inert. Have you sanded down the welds on the edges?
james p Posted November 13, 2007 Report Posted November 13, 2007 My filter has stayed on for the past 11 months ive lost 4
Mr Sam Posted November 13, 2007 Report Posted November 13, 2007 very nice work and fab there how do you empty it?
4parajon Posted November 13, 2007 Author Report Posted November 13, 2007 My filter has stayed on for the past 11 months ive lost 4 The tube it fits over has been beaded so mines not going anywhere
4parajon Posted November 13, 2007 Author Report Posted November 13, 2007 Very nice work John, i'd love the facilities to be able to do that. Love a bit of tungsten inert. Have you sanded down the welds on the edges? Yep
4parajon Posted November 13, 2007 Author Report Posted November 13, 2007 how do you empty it? Its only held on with 2 self tappers, although I might put a drain hole on it yet.
Nettles Posted November 13, 2007 Report Posted November 13, 2007 Nice one fella that’s some top quality fabrication work you’ve done there
4parajon Posted December 6, 2007 Author Report Posted December 6, 2007 And here it is sitting in its new home
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now