ratman Posted February 7, 2008 Report Posted February 7, 2008 sorry if this sounds dumb but i kill for a living If I was going to re-plaster board my livingroom cealing what type would i use I thought plasterboard was plasterboard didnt realise they do so many types Baseboard 9.5mm Plasterboard Square Edge 12.5mm Tapered Edge Plasterboard 9.5mm Tapered Edge Plasterboard 12.5mm Wallboard 9.5mm Help
marky4 Posted February 7, 2008 Report Posted February 7, 2008 if you are going to replaster the ceiling then 9.5 square edge should do
X-pack-Glyn Posted February 7, 2008 Report Posted February 7, 2008 9.5 square edge and dont bother with that stupid joint tape, it looks worse than the joint its trying to hide.
action dan Posted February 7, 2008 Report Posted February 7, 2008 9.5 square edge is what i use for ceilings and then skrim tape the joints its like a webbed tape then skim over with multi finish
over_head_cam Posted February 7, 2008 Report Posted February 7, 2008 9.5 square edge is what i use for ceilings and then skrim tape the joints its like a webbed tape then skim over with multi finish
Posse Posted February 7, 2008 Report Posted February 7, 2008 joint tape deffo steve otherwise you will end up with cracks
ratman Posted February 8, 2008 Author Report Posted February 8, 2008 cheers guys 9.5 square edge it is with skrim tape
peterbilt Posted February 11, 2008 Report Posted February 11, 2008 just ask your local builders yard they give you right info
Nettles Posted February 11, 2008 Report Posted February 11, 2008 Make sure you screw the bloody board up, not nail it up like I did
jimbo Posted February 11, 2008 Report Posted February 11, 2008 Make sure you screw the bloody board up, not nail it up like I did That sounds familiar
Posse Posted February 11, 2008 Report Posted February 11, 2008 Yes drywall screws as nailing it they rust .And steve deffo use tape m8 unless you want to be doing it agian otherwise you will end up with more cracks than Hmmmmmmmmmmm some stud
jpayne Posted February 12, 2008 Report Posted February 12, 2008 Thickness depends on how far apart the supports/ ceiling joists are. If they are 450mm or less apart id use 12.5 tapered edge tape and fill. otherwise youll get sagging between the joists and every joint will crack and your back to scratch. Anything above 450mm spacing and Id go thicker. 9.5 really only good on the wall. Carefull when lifting the thin stuff into the ceiling if you use it as it may snap. good luck, Justin P
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now