-2 inch springs

[white_van_man]

hi all i have some capri struts on my 100e with standed spring and they are to high , so i have got some capri -2 inch springs , now my problem is the springs are to short for the strut by about half an inch , i have been told to wire them up so i have done this and they look crap , has any one got a better idear of how two sort this problem out thanks white_van_man

[capriclive]

what about a few spot welds on the inside of the springs to cup. not too many incase you need to remove them.

[Twinkle]

i was only thinking about this earlier and was wondering if you could use spring dslocation cones that we used to use on the range rovers to help the spring guide itself back into the cup after they pop out on the rough stuff

[white_van_man]

thanks for the info , i asked old ford and there said they just drill small holes in the spring cups and wire them up with trying wire so that what i have done hope the mot mans in a good mood when i take it thanks again white_van_man