BIG G Posted March 11, 2008 Report Posted March 11, 2008 Why are they such a shite fit. It seems to be a lot to short..... its on but its short
RChambers Posted March 11, 2008 Report Posted March 11, 2008 The one I bought from Rally Design many moons ago fit fine on my Mk2. There are a couple of different lengths of steering columns and some are too short with the gp4 knuckle I think?
tonymk2wagon Posted March 11, 2008 Report Posted March 11, 2008 short ones are late mk 2 and early mk 2's are about an inch longer. my wagons the early type . this month classic ford has a fitting guide for steerig rack and thats the later short one.
Guest MK1gaz Posted March 11, 2008 Report Posted March 11, 2008 sounds foooooookin dangerous to me mate , i've got one for mine so i will check it out before i fit it then
BIG G Posted March 11, 2008 Author Report Posted March 11, 2008 I also bought a bolt on double width kit to get rid of my dive kit ballocks and that was over 1.5 inches out one way and 2 inches to wide when bolted up for the roll bar to fit in ...... they must make enough of these kits for them to fit twankers
Guest MK1gaz Posted March 11, 2008 Report Posted March 11, 2008 That's why it's called rally re-design mate , they design it and you have to re-design it so it fits !!!!!!!!!!!!
BIG G Posted March 11, 2008 Author Report Posted March 11, 2008 some bit i would deffo get from there again but bits that need to fit fook that
PIG Posted March 12, 2008 Report Posted March 12, 2008 alot of my body type bits i have got from r.a.c.e,there stuff is very good imo.although i ordered a new 16row oil cooler kit from rally re-desin yesterday.hope thats ok
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now