ashley mild or stainless?

[geoffersmasher]

now i have a dilema ive been stung by the bank this month for 200 but thats another story so i wont go into it.

 

so my problem is i was basiclly saving up to get the tina mot'ed and fit a 105speed stainless full system

 

now my savings have to pay off the bank.

 

so do i just buy the stainless system and leave the car for another month, or do i get an ashley exhaust and an ashley 4-1 manifold and mot it and leave it like that for now?

 

is there much benifit from the stainless system in comparison to the ashley 2" and 4-1

 

or is it just a life time warranty and a couple of ponies

 

 

cheers in advance for the help guys

[Guest MK1gaz]

Stainless don't rust BUT sounds shite and will give you a headache instead !!!!!!!! Booooooooom booooooooom buzzzzzzzzz . Plus it cracks alot easier than a proper exhaust

[zetecmk2]

ashley should supply a large hammer in thier fitting kit! once its on, its ok. gives you time to save up for what you want then get most of your money back when you put it on ebay

[pauln]

Used a couple of ashley systems. I expect to have to hit an escort system with a hammer to make it fit my cortina. 1st system came off after 2 1/2 years (to fit a larger bore) with no rust so they last pretty well and its made of nice thick steel and the bends are good. Don't think the manifolds are too good though (though the only one I have had a close look at is Glens) from hearing other comments.

[MK2Ed]

Ashley...

[john_3.0s]

ask yourself one question....

 

are you leaving your pride and joy somewhere that its going to be subject to the level of corrosion that means you need to replace a mild steel exhaust system fequently?? if so you will be replacing your floors and chassis rails on an almost equally regular basis.

 

stainless is an absolute waste of money (IMHO of course) unless you own a boat.

[geoffersmasher]

well ive just ordered a 2 1/4 inch 4 to 1 ashley xflow manifold and a 2 1/4 inch single box ashley system, and when they arrive i will promptly be getting w.p.e to mod to fit for me

 

 

hope there not to loud

 

ask yourself one question....

 

are you leaving your pride and joy somewhere that its going to be subject to the level of corrosion that means you need to replace a mild steel exhaust system fequently?? if so you will be replacing your floors and chassis rails on an almost equally regular basis.

 

stainless is an absolute waste of money (IMHO of course) unless you own a boat.

 

this is so true and has really put my useless undeciding mind at ease