jimbo Posted November 17, 2008 Report Posted November 17, 2008 Hi all, My escort has been gradually developing a noise over the last 3000 miles. It is a hum that increases with road speed. At low speed (with the transmission in D, and my foot on the brake) there is a clinking clunk from the RH rear wheel. It occurs once per turn of the wheel. Had the drum off and all the brakes look happy and healthy. So if not the brakes and with the hum getting progressively louder, I've assumed that it is a bearing, but am not getting a wobble from the wheel. Could it still be a bearing issue? i.e. can a bearing still wear/brake without giving a tell-tale wobble? Or could it be something else? Your thoughts and experiences are welcomed. Cheers, Jim
Posse Posted November 17, 2008 Report Posted November 17, 2008 Not sure but have you checked the diff oil?
bortaf Posted November 17, 2008 Report Posted November 17, 2008 Have you checked the diff oil level? if it's low it may not be reaching the bearings and that counld knacker em? it does sound like a bearing to me, with a flat pot on some/one of the bearings causing the chink? Pah, faster typers
bullittcraig Posted November 17, 2008 Report Posted November 17, 2008 It still could be the wheel bearing even though there`s no wobble. I would check on the diff oil like they said first but without hearing it for myself its difficult to say exactly what could be causing it.
countrybumpkin Posted November 18, 2008 Report Posted November 18, 2008 you could have a cracked rim try swaping the wheels front to rear see if it makes a difference
jimbo Posted November 18, 2008 Author Report Posted November 18, 2008 Thanks for the tips guys....... Checked the diff oil. It's right up to the max.... Visually checked the wheel for cracks. Appears OK Is there anything else it might be? I can't think of anything....... So if it comes to that, I have a spare bearing in my box of tricks......I'm happy with the removal of the half shaft part of the process. Am I right in thinking I can drill/chisel off the old bearing, then drift the new one on? Any other tips for doing this?? Cheers, Jim
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now