jimbo Posted November 20, 2008 Report Posted November 20, 2008 In the back of my haynes manual, it suggets that I can remove the halfshafts on my Escort by screwing some suitable bolts into the back plate retaining screw holes, to press out the shaft. This appeals to me as I don't have a slide hammer, or a sacraficial wheel to whack it out with..... So that I don't get caught out on Saturday (with no car), I don't suppose anyone knoows what they mean by a suitable bolt (thread, length, etc.) Your help is much appreciated......
Posse Posted November 20, 2008 Report Posted November 20, 2008 Your best bet is to see if you can get hold of a slide hammer
ratman Posted November 20, 2008 Report Posted November 20, 2008 where abouts are you jim ? ive got a slide hammer if you wanna borrow it im in sutton
stevepeanut Posted November 20, 2008 Report Posted November 20, 2008 if the axle is outof the car, go to machine mart and buy the biggest hammer they sell and twat the bugger, out in one go. I tried with a normal claw hammer for hours with no luck. 1 huge 3 foot hammer, and out in first hit
jimbo Posted November 20, 2008 Author Report Posted November 20, 2008 I don't suppose there is anyone near Evesham who I can borrow one off on Saturday?
julian.jay Posted November 21, 2008 Report Posted November 21, 2008 When I was speaking to Fostek recently I was told to make sure I noted which side was which as in use over the years the shaft 'winds up' and if you put it back on the other side it could 'unwind'!
jimbo Posted November 21, 2008 Author Report Posted November 21, 2008 When I was speaking to Fostek recently I was told to make sure I noted which side was which as in use over the years the shaft 'winds up' and if you put it back on the other side it could 'unwind'! Thanks for the heads up Julian. I'l be lucky to get one side out at this rate. And thanks for the offer Ratman.....I wish I could take you up on them, but geography is not on my side
huxmk1estate Posted November 21, 2008 Report Posted November 21, 2008 When I was speaking to Fostek recently I was told to make sure I noted which side was which as in use over the years the shaft 'winds up' and if you put it back on the other side it could 'unwind'! Thanks for the heads up Julian. I'l be lucky to get one side out at this rate. And thanks for the offer Ratman.....I wish I could take you up on them, but geography is not on my side im in worcester if you wanna borrow one mate... im around sunday to.... will pm you my number
5hane Posted November 21, 2008 Report Posted November 21, 2008 put the drum brake back on it the wrong way round, give it a tap and it should pop off took under 5 mins to do both sides but makesue all four bolts are holding the drum on.. otherwise like me you will bend the studs
razersedge Posted November 21, 2008 Report Posted November 21, 2008 put the drum brake back on it the wrong way round, give it a tap and it should pop off took under 5 mins to do both sides but makesue all four bolts are holding the drum on.. otherwise like me you will bend the studs depend's if they have ever been out or not i had an axle off a ghia and they had never been taken out 3 hours me and twinkle were smacking the crap out of it with a slide hammer and still not out, let the misses have a go and a fresh pair of arms got them out in the end. but now cos they have been out so many times i can pull them out with my hands
5hane Posted November 21, 2008 Report Posted November 21, 2008 haha mine cam out really easy lol they almost flew across the garage but i made a monumental mistake.. and forgot to undo the 4 flange bolts but once they came out easy
ratman Posted November 21, 2008 Report Posted November 21, 2008 And thanks for the offer Ratman.....I wish I could take you up on them, but geography is not on my side No biggie my man
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now