suggestion needed

[flyingbanana]

for the best way to sort this small hole out,which is on a mk1 escort by the inside edge lip

 

 

it has gone at the back of it has well which lets the water into the boot

 

the prob i have is that i cant get angle grinder in their to chop any out with out cutting into other panels

 

i also cant get it from the inside boot has the rear boot post piller is in the way

and dont want to fill it with body filler etc ....any suggestions pls so i can weld a new section in

 

the only way i can see it chop a section out and make my own up,to replace orignal shape

[sitting_budda]

you could use a dremel or similiar tool to cut a small section out so that you dont have to remove any of the panels.

 

 

Slip a small repair section behind it and weld it in place. Skim of filler over the top and then its good as new.

 

Or you could use fibreglass.