stevepeanut Posted October 30, 2009 Report Posted October 30, 2009 my doris has given me £500 to kick start getting my capri sorted out, so I need to buy a mig. I dont want to spend all the £500. Whats good in the £200-£300 range. Is it best to go for a dual gas/gassless one? I will need to be able to weld outside.
baz105e Posted October 30, 2009 Report Posted October 30, 2009 ive got a clarke weld 100 it cost bout 150 pound from machine mart and its never let me down
Mr Sam Posted October 30, 2009 Report Posted October 30, 2009 ive got the clarke 130turbo ? around the £200+ mark and is a grea bit of kit dont be tempted to go cheap one and DONT buy a gasless it may sound cheaper but the wire is double the price
andy a Posted October 30, 2009 Report Posted October 30, 2009 Clarke 150t is a good little unit, they go around £250 plus the VAT but Machine Mart do hold VAT free nights if you can wait a bit, then you need a different regulator unless you plan on running it on the disposable bottles which are a waste of time and expensive, their about 20-25 quid and then you will need to either hire a bottle of Argon/Argoshield through BOC or similar or run it on pub gas, not as good but cheaper...
GT_lenny Posted October 30, 2009 Report Posted October 30, 2009 Clarke 150t is a good little unit, they go around £250 plus the VAT but Machine Mart do hold VAT free nights if you can wait a bit, then you need a different regulator unless you plan on running it on the disposable bottles which are a waste of time and expensive, their about 20-25 quid and then you will need to either hire a bottle of Argon/Argoshield through BOC or similar or run it on pub gas, not as good but cheaper... the machine mart bottles are just under £10 and now come with nearly twice the gas in them as they used to, on my entire restoration i've used 4 or five bottles, which in my opinion is worth not having to drag a big bottle round after the welder, incidentley i'm using a clarke 151te- spot on
stevepeanut Posted October 30, 2009 Author Report Posted October 30, 2009 I'm looking at a gas-less, cos all my welding is going to be done outdoors
mk3tina Posted October 30, 2009 Report Posted October 30, 2009 ive had my clarke 100EN for about 5 years now, did all the welding work on the two classics ive owned, and a lot of other things in that time, its a great unit and ive never had a problem with it, itll do thicker stuff like main chassis members, exhausts and even thicker things ive had to weld up. think it was just over £120 with the VAT
Fiesta Steve Posted October 30, 2009 Report Posted October 30, 2009 I'm looking at a gas-less, cos all my welding is going to be done outdoors If your buying a mig it HAS to be gas. As Sam said the wire is double the money and you'll get through loads of it for very little welding, most of it ends up on the floor s splatter and the welds will be poor. Gas will be fine outside provided your not welding while its blowing a hoolie
mk3tina Posted October 30, 2009 Report Posted October 30, 2009 flux cored wire for using the welder in the gasless option isnt exactly a massive price increase over wire for use with gas. for instance with machine marts prices, its like £8.21 or something for flux cored wire, and £6 odd for the normal stuff, so not a big deal, and its probably cheaper elsewhere. and my welds arent poor at all with gasless.
stevepeanut Posted October 31, 2009 Author Report Posted October 31, 2009 just bought a clarke 130EN from machine mart, so hopefully will get a practice later this week on some scrap
Mr Sam Posted October 31, 2009 Report Posted October 31, 2009 flux cored wire for using the welder in the gasless option isnt exactly a massive price increase over wire for use with gas. for instance with machine marts prices, its like £8.21 or something for flux cored wire, and £6 odd for the normal stuff, so not a big deal, and its probably cheaper elsewhere. and my welds arent poor at all with gasless. i was paying £8 + for gasless wire and £3.99 for normal wire now and get the machinemart co2 double capacity in a normal bottle, lasts ages
bigdaz27 Posted November 2, 2009 Report Posted November 2, 2009 i use a gas-less welder and get very good results i find it very neat and if you get the wire of the net in bulk its not that exspensive £27 for five
stevepeanut Posted November 2, 2009 Author Report Posted November 2, 2009 i use a gas-less welder and get very good results i find it very neat and if you get the wire of the net in bulk its not that exspensive £27 for five I'm glad you are finding gasless good. I am getting very confused my peoples opinions. Everyone who has gas, says I really should go for a gas bottle set up, but also everyone who is using gasless says it works fine.
bigdaz27 Posted November 2, 2009 Report Posted November 2, 2009 well im new to welding to and found the gasless welder ive got very good ive found geting strong neat welds quite easy any way your better of with a cheap welder and a good AUTO-DARKENING HELMET as you only get one pair of eyes you can get cheap gassless welders on ebay for peanuts if you dont get on with it sell and get your money back
bigdaz27 Posted November 2, 2009 Report Posted November 2, 2009 this link gives good info on gasless welding http://www.mig-welding.co.uk/gasless-mig.htm
stevepeanut Posted November 2, 2009 Author Report Posted November 2, 2009 Daz when I got the welder on sat, I bought an auto dark helmet too, seemed a really good idea, and looks like it will make life easier and safer
GT_lenny Posted November 3, 2009 Report Posted November 3, 2009 auto helmets are bloody brilliant good choice money well spent
mk3tina Posted November 3, 2009 Report Posted November 3, 2009 agreed, auto-darkening helmets are gods gift to the welder, ive just bought myself a new fancy one and as much as i loved welding before, i love it even more now, comfort is a big factor as well, as im welding about 7 or so hours a day, and with an uncomfortable helmet you get mega headaches and fatigue. so this nice new one with nice padded interior makes my life so much better.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now