Jump to content

Recommended Posts

Posted

my doris has given me £500 to kick start getting my capri sorted out, so I need to buy a mig. I dont want to spend all the £500. Whats good in the £200-£300 range. Is it best to go for a dual gas/gassless one? I will need to be able to weld outside.

Posted

ive got the clarke 130turbo ? around the £200+ mark and is a grea bit of kit

 

 

dont be tempted to go cheap one and DONT buy a gasless it may sound cheaper but the wire is double the price :roll:

Posted

Clarke 150t is a good little unit, they go around £250 plus the VAT but Machine Mart do hold VAT free nights if you can wait a bit, then you need a different regulator unless you plan on running it on the disposable bottles which are a waste of time and expensive, their about 20-25 quid and then you will need to either hire a bottle of Argon/Argoshield through BOC or similar or run it on pub gas, not as good but cheaper...

Posted
Clarke 150t is a good little unit, they go around £250 plus the VAT but Machine Mart do hold VAT free nights if you can wait a bit, then you need a different regulator unless you plan on running it on the disposable bottles which are a waste of time and expensive, their about 20-25 quid and then you will need to either hire a bottle of Argon/Argoshield through BOC or similar or run it on pub gas, not as good but cheaper...

 

the machine mart bottles are just under £10 and now come with nearly twice the gas in them as they used to, on my entire restoration i've used 4 or five bottles, which in my opinion is worth not having to drag a big bottle round after the welder,

 

incidentley i'm using a clarke 151te- :thumbsup: spot on :thumbsup:

Posted

ive had my clarke 100EN for about 5 years now, did all the welding work on the two classics ive owned, and a lot of other things in that time, its a great unit and ive never had a problem with it, itll do thicker stuff like main chassis members, exhausts and even thicker things ive had to weld up. think it was just over £120 with the VAT

Posted
I'm looking at a gas-less, cos all my welding is going to be done outdoors

 

If your buying a mig it HAS to be gas.

 

As Sam said the wire is double the money and you'll get through loads of it for very little welding, most of it ends up on the floor s splatter and the welds will be poor.

 

Gas will be fine outside provided your not welding while its blowing a hoolie :thumbsup:

Posted

flux cored wire for using the welder in the gasless option isnt exactly a massive price increase over wire for use with gas. for instance with machine marts prices, its like £8.21 or something for flux cored wire, and £6 odd for the normal stuff, so not a big deal, and its probably cheaper elsewhere. and my welds arent poor at all with gasless.

Posted
flux cored wire for using the welder in the gasless option isnt exactly a massive price increase over wire for use with gas. for instance with machine marts prices, its like £8.21 or something for flux cored wire, and £6 odd for the normal stuff, so not a big deal, and its probably cheaper elsewhere. and my welds arent poor at all with gasless.

 

i was paying £8 + for gasless wire and £3.99 for normal wire now

 

and get the machinemart co2 double capacity in a normal bottle, lasts ages :thumbsup:

Posted
i use a gas-less welder and get very good results i find it very neat and if you get the wire of the net in bulk its not that exspensive £27 for five

 

I'm glad you are finding gasless good. I am getting very confused my peoples opinions. Everyone who has gas, says I really should go for a gas bottle set up, but also everyone who is using gasless says it works fine.

Posted

well im new to welding to and found the gasless welder ive got very good ive found geting strong neat welds quite easy any way your better of with a cheap welder and a good AUTO-DARKENING HELMET as you only get one pair of eyes you can get cheap gassless welders on ebay for peanuts if you dont get on with it sell and get your money back

Posted

agreed, auto-darkening helmets are gods gift to the welder, ive just bought myself a new fancy one and as much as i loved welding before, i love it even more now, comfort is a big factor as well, as im welding about 7 or so hours a day, and with an uncomfortable helmet you get mega headaches and fatigue. so this nice new one with nice padded interior makes my life so much better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...