camshaft O/R and Blank?

[RossMK2]

i have to ask whats the difference iv read somewhere something about forging on the blank one

 

the O/R is on this link (cheaper)

http://www.rallydesign.co.uk/product_info.php?products_id=12272

 

the blank one is on this link (dearer)

http://www.rallydesign.co.uk/product_info.php?products_id=12332

[Fiesta Steve]

The cheaper one is probably an old cam reground the dearer one will be a new cam

[RossMK2]

ok thanks mate dearer one it is then

[w p e]

85% of kent cams are reprofiled unless stated or you ask for a blank to keep the base circle

[5hane]

85% of kent cams are reprofiled unless stated or you ask for a blank to keep the base circle

 

Will that make much of a diffrence??

[escort21]

Yes, The base circle determines the rocker geometry especially on pintos, bad geometry means less lift and bad wear in a short period of time. I fitted an rl31 to my pinto with bad goemetry and a kept having reliability problems, fitted a rl30 and corrected the geometry and its much faster, quieter with the less lairy cam

[RossMK2]

Yes, The base circle determines the rocker geometry especially on pintos, bad geometry means less lift and bad wear in a short period of time. I fitted an rl31 to my pinto with bad goemetry and a kept having reliability problems, fitted a rl30 and corrected the geometry and its much faster, quieter with the less lairy cam

 

so if i buy the blank all will be ok?

[Fiesta Steve]

Any will most likely be fine. I think its more of a problem on pintos with lairy profiles.