line lock

[banarama]

my sevo needs replacing now its lots its fluid over the winter.so i want to fit my line lock ive had for ages,to the point/is it okey to plumb it in to the rear brake pipe ,will mount the lever beside the tunnel,cut the brake pipe feed it through the inner side of the tunnel through two grommets either side of the leaver. will this be okey :roll

[4-Door Pete]

Hi, If you have a RWD car you'll want the line lock in the front brake line. The idea is to lock the front brakes on so you can spin the rear wheels. On a FWD car you can just use the hand brake. Pete

[Fiesta Steve]

Hi, If you have a RWD car you'll want the line lock in the front brake line. The idea is to lock the front brakes on so you can spin the rear wheels. On a FWD car you can just use the hand brake. Pete

 

Not on a Fiesta you can't, there rubbish

[baz105e]

as allready said the line lick should go on the FRONT brakes, press the pedal to the floor hard and engage the line lock, take your foot back off of the brake pedal and your front brakes are locked, do your burnout without your foot on the pedal then when you're done just turn the locker off

been told that if you put the locker into the rears it can fook the master cylinder or the front calipers due to excessive pressure